







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Denton Owner’s Guide
If you’re pricing Jerith-compatible driveway and paver work in Denton, a full paver driveway installation typically runs $7,000 to $18,000, and sealing an existing surface runs $250 to $700. We install Jerith-compatible pavers and can usually get an independent, background-checked crew out to assess your failed section quickly. Bradford Remodeling Co Denton is an independent contractor and is not affiliated with Jerith.

Most Denton owners find out something’s wrong the same way: a paver at the driveway apron shifts under the front tire on a hot July afternoon, or the joint sand washes out after a spring storm and grass starts sprouting from the seams. A paver splitting at the edge of the street cut. A dip in the walkway that holds water and turns slick. Jerith’s driveway and paver systems hold up well when they’re set on a properly compacted base, but the base is where failure starts, and Texas weather works it hard.
Key takeaways
- Installed paver driveway in Denton: $7,000 – $18,000.
- Driveway sealing runs $250 – $700 and should be done about every 2 to 3 years here.
- Sealing, re-sanding joints, and re-leveling single pavers are the routine fixes that keep a Jerith surface alive.
- Every job gets a written price before work starts and the 365-Day Done Right Promise afterward.
Which Jerith Models This Applies To

Jerith’s hardscape lines include paver-style driveway and walkway systems. The compatibility that matters for you is the paver profile and thickness, and whether your section is set on a compacted aggregate base directly or over a concrete slab with a setting bed. Most residential paver driveways in Texas are the base method, and that’s the method we match. If your existing pavers sit on a slab with a thin mortar bed, the repair approach changes completely – patching a slab-set section with base-installed pavers will drift and pop within a season.
To identify what you have, look for an embossed profile mark on the back of a loose paver or at the edge of an open joint. Measure the actual thickness of a pulled unit with a tape measure, not from memory – common paver thicknesses are around 2⅜ inches and around 2¾ inches for heavier drive-rated profiles, and ordering the wrong thickness creates a trip edge at the joint line. Measure the joint spacing too. If you don’t find a mark, a photo of the profile and your measurements are usually enough for us to match or source a compatible paver.
The OEM-versus-aftermarket call for Jerith paver systems is straightforward. OEM-matched pavers keep the color and size consistent with the rest of the driveway. A quality compatible paver from a documented brand can cost less and sometimes installs faster, but it has to match thickness and profile exactly or you’ll see a visible seam and a level break. Other brands we work with on overall projects include KraftMaid, Cambria, and Silestone, but for your driveway the only thing that matters is the paver match. We work with Belgard and Unilock, among other documented manufacturers, and every material comes with its own specification sheet so you’re not guessing at what’s going in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Joint sand washing out after storms. North Texas rain and the shrink-swell clay underneath Denton push water through the joints and carry the sand with it. Once joints open, weeds and ants move in and the pavers start rocking.
- Rocking or wobbling pavers. A paver that moves underfoot means the base beneath it has lost compaction or settled. It’s the earliest sign, and it’s the cheapest one to fix before the failure spreads to the neighbors.
- Sunken sections or ponding water. A dip that holds water after rain usually means the base wasn’t deep enough or the subgrade clay moved. In Denton this shows up most often on the driveway apron where runoff concentrates.
- Cracked or chipped pavers. Cracking at the drive lane, or chipping along the street edge, is a load-and-edge problem. It can come from a base failure underneath or from a poorly restrained edge course that lets the driveway spread outward.
- Uneven color or efflorescence bloom. A white chalky haze and uneven color usually mean moisture is trapped under the surface. It’s cosmetic most of the time, but persistent bloom points to drainage that needs attention.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed paver work in Denton falls into a range of $7,000 to $18,000 for a full paver driveway, and a driveway replacement of any surface type runs $5,000 to $14,000. A paver patio installation runs $3,500 to $11,000. Sealing an existing paver surface runs $250 to $700. Those aren’t ballpark guesses; they’re the numbers we put in writing before we lift a single paver.
What drives the number up or down:

- Square footage and how much of the job is full replacement versus spot repair.
- Whether we’re cutting out and re-compacting base or building on top of a sound base.
- Paver thickness and profile – drive-rated units cost more than walkway-class units.
- Edge restraint and drainage corrections, which are where cheap bids quietly skip scope.
Every job comes with a line-item written price that doesn’t change unless you approve a scope change in writing – no numbers moving at the door. Every completed installation carries the 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge. The written guarantee is in your hand at job close, along with the clean site and documented scope.
DIY or Call Us?
What you can safely check on your own: pull a single loose paver and look at the base, walk the surface and mark every rocker with chalk, check that the joint sand is full, and confirm that water drains away from the house rather than pooling at the apron. Re-sanding joints and pulling a couple of pavers for an inspection is reasonable DIY work for a careful homeowner.
Where DIY goes wrong is at the base. Replacing one paver without addressing the settled base underneath simply kicks the same failure down the driveway. Tearing out and re-compacting the base by hand, then re-setting pavers so the finished surface drains correctly, is heavy work that takes a plate compactor, a proper edge restraint, and a level line you trust. Do that wrong and you’ll lose the finish, the drainage, or both. It’s work an experienced crew does correctly in one pass, and our technicians have up to 22 years of experience.
If you can’t safely lift or reset a paver section, or the failure spans more than a couple of units, call us. Live person answers the phone, 24/7.
FAQs

A properly installed paver surface typically lasts 25 to 30 years, and the paver itself often outlives the base and joints. What fails first is the joint sand and the base, not the stone.
Often, yes. Rocking or missing pavers, washed-out joints, and localized settlement are common repair items. If the base under a wide section has failed or the edge restraint is gone, a section replacement makes more sense than patching.
Spot repairs and re-sanding on a single failed section can often be finished in a single visit. A full driveway installation or larger replacement takes longer, typically several days depending on square footage and base condition. We’ll give you a realistic timeline in the written quote.
We identify the paver by its profile, thickness, and joint spacing, then source an OEM-matched unit or a compatible paver from a documented manufacturer. The specification is written into your quote so you know exactly what’s being installed and what warranty backs it. Call (844) 651-3175 for a free estimate.
Call (844) 651-3175 for a free estimate. A live person answers 24/7, and every price we give you comes in writing before any work starts.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












