







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Denton Owner’s Guide
We install and repair KraftMaid bathroom cabinetry and the parts that go with it across Denton, and a full bathroom remodel typically runs $9,000 – $28,000 installed. The part failures we get called for most in Denton are soft-close hinges that won’t hold adjustment, broken drawer glides on vanity stacks, cracked or hazed door fronts, and sagging cabinet boxes where the original install skipped proper blocking behind the wall. Owners usually find out the hard way: a vanity door that hangs crooked no matter how many times they tighten it, a drawer that jumps its track every time it’s opened, or a finish that starts peeling around the sink after a few humid summers in a Denton bathroom that never had proper ventilation.

Which KraftMaid Models This Applies To

KraftMaid builds bathroom cabinetry across several lines – the value-oriented series, the mid-grade lines, and the premium full-overlay lines – and the hinge and glide hardware changes between them. Before you order a single part, find the model line and cabinet series, usually printed on a label inside the cabinet box, on the back of a door, or on the original order paperwork. If the label is gone, measure the door overlay (the amount the door covers the opening) and the drawer box dimensions; those two numbers narrow it down fast. Bathroom vanities tend to run shallower than kitchen cabinets, typically 21 inches deep against a kitchen’s 24, so a kitchen glide or hinge will not always fit a bathroom vanity even when the brand matches.
On the OEM-versus-aftermarket call: for hardware and finish parts, going OEM through KraftMaid keeps the fit and the warranty intact and is usually the cleaner answer. For a full bathroom remodel or a vanity replacement, a quality equivalent from a documented brand is worth pricing against OEM, especially when the original line has been discontinued. We’re an independent service provider and not affiliated with KraftMaid; we work with the brand’s parts and specs, and we’ll tell you straight when an OEM part is the only sensible route and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
Here’s what a failing KraftMaid bathroom install looks like, and what’s actually behind each symptom.
- Doors that won’t stay adjusted: The soft-close hinge has lost its spring tension or the mounting screws have stripped out of the cabinet face. A stripped screw hole is a one-time fix with a proper repair sleeve; a dead hinge needs replacing.
- Drawers that jump or sag on the glide: The drawer glide has worn its rollers or the glide arm has bent under overload. Vanity drawers get overloaded more than kitchen drawers, which is why this shows up first in the bathroom.
- Finish peeling or bubbling near the sink: Moisture is getting past the finish and into the substrate – the material under the surface. Denton’s humid summers and a bathroom with weak exhaust are the usual culprits. This is a ventilation problem as much as a finish problem.
- Cabinet box sagging or separating at the seams: The original install skipped blocking or the fasteners have pulled loose from the wall. This one is structural; a sagging vanity box stresses every hinge and glide attached to it.
- Cracked or hazed door fronts: Age, cleaning solvents, or impact. On a thermofoil or laminate front, a crack lets moisture under the surface and the failure spreads. Replacement front is usually the honest fix.
Replacement Cost & What’s Included
In Denton, a bathroom remodel runs $9,000 – $28,000 installed; a small bathroom remodel runs $5,000 – $12,000; a bathroom vanity installation alone is $800 – $3,000. Where a specific part swap is the whole job rather than a remodel, the parts-plus-labor number sits well below those ranges – the range moves on which part, how many, and whether the cabinet box needs repair behind it.
What drives the range: the cabinet line and door style, whether you’re replacing hardware only or door fronts and boxes too, plumbing fixture changes (we install Kohler and Moen), and whether the existing ventilation and blocking need correcting before anything new goes in. Every price we give is written before any work starts – no numbers that move at the door. Every completed project carries our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge. Cambria, Silestone, and Kohler are among the documented brands we work with for surfaces and fixtures.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely identify your cabinet line from the label, measure the door overlay and drawer box, photograph the failed hinge or glide, and order a direct replacement for a stripped screw or a bent glide. That’s the honest DIY ceiling on this part. Where it goes wrong: forcing a hinge that doesn’t match your overlay, over-tightening and crushing the cabinet face, or replacing hardware on a sagging box that was never going to hold new parts straight. And any step that has you working around an open water supply or live wiring behind the vanity should stop there – shut the supply off and bring in a trained professional rather than reach past it.
Call (844) 651-3175 if you’d rather we take it from the identification step. A live person answers, day or night, and the estimate is free.
FAQs

A well-installed KraftMaid vanity should hold its hardware and finish for 15 to 20 years; hinges and glides are often the first things to need replacing well before the cabinet box does. Humidity is the wildcard in Denton – bathrooms without a working exhaust fan cut that lifespan noticeably because moisture attacks the finish and the substrate from the inside out.
Sometimes, yes – a stripped screw hole can take a repair sleeve, and a hinge that’s only out of adjustment can be re-set without new parts. A cracked thermofoil front, a dead soft-close hinge, or a bent glide is a replacement, not a repair. Call (844) 651-3175 and we’ll tell you which side of that line your part is on before you spend anything.
A single hinge or glide swap is a short visit, often under an hour. Replacing a full set of door fronts or hardware across a vanity stack runs longer, and if the cabinet box needs re-blocking or a ventilation fix, plan on more. We give you the time estimate in writing alongside the price.
We match the part to your cabinet line and series using the label, measurements, and the original spec where it’s available, and we price OEM against a quality equivalent so you can see both numbers. We’re independent of KraftMaid, so our recommendation is based on fit and your warranty, not on pushing one source. Call (844) 651-3175 for a free estimate on the whole job.
Get a Written Price Before Any Work Starts
If you’ve got a failing KraftMaid vanity in Denton, the fastest way to a straight answer is a phone call. We’ll identify the part, tell you whether it’s a swap or a repair, and put the price and the guarantee in writing before a tool comes out – squared away at close with a clean site and your signed written guarantee in hand. Bradford Remodeling Co Denton is part of the Garrison Partners family and held to The Garrison Standard on every job. Call (844) 651-3175 for your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












