







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Denton Owner’s Guide
A full KraftMaid kitchen remodel in Denton typically runs $14,000 – $45,000 installed, and a small kitchen remodel lands between $9,000 and $20,000. Cabinet installation alone is $4,000 – $13,000. No, we can’t finish a kitchen same-day, and we won’t pretend we can.

Most Denton owners don’t arrive at this page by browsing. They arrive because a KraftMaid door is sagging, a drawer slide grinds, or a cabinet box has swollen at the toe kick after a wet spring. The part failed, the kitchen is half-usable, and they need to know what it costs to set it right. We work with the KraftMaid line and know where the weak points show up in North Texas homes. Every price we give comes in writing before any work starts.
Which KraftMaid Models This Applies To

KraftMaid cabinetry spans several door series and box constructions, and the part that fits one won’t fit another. Door hinges are the clearest example. A full-overlay door with a concealed European cup hinge needs a hinge with the correct cup bore (typically 35mm) and the right overlay offset, usually 1/2-inch up to 1-1/4-inch depending on the door style. A partial-overlay or face-frame cabinet takes a different hinge entirely. Grab the wrong one and the door either rubs the next cabinet or sits proud of the frame.
Before ordering anything, find the model label. KraftMaid prints a spec sticker inside the cabinet box, usually on the inside of a side panel or the back of a drawer box. It lists the door style and finish. Measure the cabinet opening (width, height, depth) and note whether the box is framed or frameless. That sticker plus those three measurements is what any parts order gets built on.
OEM KraftMaid parts match the original finish and hinge geometry exactly, which matters if you’re blending a replaced door into a matching run of cabinets. Quality aftermarket hinges and slides from makers like Blum or Grass often cost less and carry their own rated cycle counts (a good undermount slide is rated for well over 50,000 open-close cycles), but the finish and door profile won’t match KraftMaid’s factory line. Ask us to compare both before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors that won’t stay closed or rub the neighbor. Hinge screws have pulled out of the particleboard box, or the hinge itself is worn. In Denton’s dry summers, wood doors also shrink slightly, so a door that fit in spring can drag by August.
- Drawers that stick or jump the track. The slide is worn, bent, or was misaligned at install. A slide that jumps usually means a bad track, not a bad drawer.
- Swollen or crumbling box edges at the base. Moisture has reached the substrate, meaning the particleboard core under the finish. This shows up most around the sink and dishwasher, where leaks hide.
- Peeling finish or delamination on doors and drawer fronts. The laminate or veneer has lifted from the core, often after steam from a dishwasher or simmering pot without a vent hood pulling it clear.
- Sagging shelves and loose shelf pins. Overloading plus a particleboard shelf bends over time. A missing or stripped shelf pin does the same. Both are fixable without replacing the whole cabinet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work costs in Denton, and what’s in the number. These ranges are installed prices, not parts prices, because a hinge or slide alone doesn’t fix a kitchen that’s failing at the joints.
| Scope | Installed Range |
|---|---|
| Kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with cabinet count, door style, and whether the countertop has to come out to reach a cabinet run. A basic swap of failing hinges and slides sits at the low end. Full cabinet replacement with new Cambria or Silestone surfaces pushes toward the top. Every price comes in writing before tools come out, and the 365-Day Done Right Promise backs the install for a full year; if it fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
Some of this is safe to handle yourself. Tightening a loose hinge screw, swapping a single undermount slide, or replacing a shelf pin is low-risk and worth a quick look before you call anyone. Re-hanging a door on a fresh hinge is also within reach for a confident homeowner.
Where DIY slips is at the cabinet box. If the substrate is swollen or crumbling, the screw holes won’t hold and a new hinge just pulls out again. Replacing a full cabinet run means cutting the countertop loose, disconnecting water and drain lines, and re-leveling the base so the doors line up. Get that wrong and you’re repricing a countertop too. KraftMaid parts themselves aren’t stocked in our trucks, so if you want the right part the first time, give us the sticker details and let us source it. Call (844) 651-3175 to start.
FAQs

Factory hinges and slides generally hold up 10 to 15 years under daily kitchen use, while the boxes themselves can last decades if the substrate stays dry. Finishes often fail before the box does. Call (844) 651-3175 for an exact quote; estimates are free.
Often yes. Worn hinges, slides, shelf pins, and door fronts can be swapped without tearing out the box. Swollen or water-damaged substrate usually can’t be repaired reliably and calls for replacement. Call (844) 651-3175 to have us take a look and quote both.
Replacing hinges and slides on a standard run of cabinets usually takes half a day to a full day. A full cabinet installation takes several days to a week depending on scope. Call (844) 651-3175 for a written timeline with your quote.
We pull the spec sticker from inside the cabinet box plus your measurements to confirm the exact door style, finish, and hinge geometry. Bradford Remodeling Co Denton is an independent service provider and not affiliated with KraftMaid, but we work with the line and document it through a roster that also covers Cambria, Silestone, and Kohler. Call (844) 651-3175 for a free estimate.
Whether you’re chasing a single sagging door or planning a full kitchen in Denton, the next step is the same: a written price before any work begins, background-checked and uniformed technicians on the job, and a full-year guarantee standing behind it. A live person answers the phone around the clock. Call Bradford Remodeling Co Denton at (844) 651-3175 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












