







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Denton Owner’s Guide
If you’re looking for Mr-Glass kitchen remodeling in Denton, the answer is straightforward: we install and remodel kitchens built around Mr-Glass-compatible components, and the typical Denton kitchen remodel runs $14,000 – $45,000 installed. A smaller scope, like a cabinet and countertop refresh, lands lower in that range. We’re an independent contractor and not affiliated with Mr-Glass, but we know the product line and can match specs to what you already own.

Most Denton owners end up on a page like this after something in the kitchen stops doing its job. A cabinet door that won’t sit flush. A drawer that drags. A counter seam that’s started to lift near the sink. The failure usually shows up slowly, then all at once, and by then you’re pricing a fix under pressure.
Which Mr-Glass Models This Applies To

Mr-Glass components show up across a few configurations, and the first step with any of them is identifying what you actually have. The model or series label is usually on the inside face of a cabinet door, on the underside of a drawer box, or on a spec sheet left with the original paperwork. If you can’t find it, measure the opening, the door thickness, and the hinge cup spacing. Those three numbers tell us more than a sticker does.
The compatibility gotcha most Denton homeowners miss: a door from the same series but a different production run won’t always match. Hinge cup bores shifted by a few millimeters between runs, and a replacement door that measures right on the outside can sit wrong on the inside. We measure the bore, not just the face. On the OEM-versus-aftermarket call, Mr-Glass factory parts fit exactly but cost more and take longer to source. A well-made aftermarket equivalent can work for drawer boxes and shelf pins, but for anything structural, we recommend OEM and tell you why before you decide. We also work with KraftMaid, Cambria, and Silestone components if your kitchen is mixed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay aligned. The hinge plate screws have stripped the substrate, usually because the original holes were drilled too close to the edge. Denton’s summer humidity swells the material and the screws loosen faster.
- Drawers that stick or drop on one side. The slide has worn past its tolerance, or the box has racked out of square. Racking is the tell – it means the whole box needs attention, not just the runner.
- Countertop seams lifting near the sink or range. Adhesive failure from heat cycling and standing moisture. Left alone, water gets under the seam and the substrate swells.
- Soft spots in the cabinet floor under the sink. A slow leak from the supply line or disposal has been soaking the panel for months. The wood looks fine until you press it.
- Doors that rub the frame after a few Texas summers. Material movement from humidity swings. Denton sees wide swings between spring and late summer, and that’s hard on any wood product.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Kitchen remodeling in Denton runs $14,000 – $45,000 installed. What moves you along that range: cabinet replacement versus refacing, countertop material (Cambria and Silestone sit higher than laminate), and whether the rough-in needs adjusting. A small kitchen remodel sits at $9,000 – $20,000. If you’re replacing only the failed piece, cabinet installation runs $4,000 – $13,000 and countertop installation is $2,000 – $6,500. Backsplash work is $800 – $2,500. A kitchen island adds $3,000 – $10,000.
Every job gets a written price before any work starts – line-itemed, with parts and labor separated, so you see exactly what the Mr-Glass component costs versus the installation. No numbers that move at the door. The 365-Day Done Right Promise covers the completed work for a full year: if it fails inside that window, we return and correct it at no charge.
DIY or Call Us?
Some things you can check safely. Open and close every door and drawer and note what drags, rubs, or won’t close flush. Write down the model number if you can find it. Take photos of the hinge cup and the bore spacing. Press gently on the cabinet floor under the sink to feel for softness. None of that requires tools.
Where it goes wrong: re-drilling hinge holes in a cabinet frame. One wrong bore and the door never hangs straight again, and you’ve turned a $200 fix into a $2,000 cabinet replacement. Countertop removal is the other one. Those panels are heavy, edge-brittle, and can break in a way that turns a seam repair into a full replacement. If you’re not sure whether the box is racked or the slide is worn, that’s a measurement call. Call (844) 651-3175 and we’ll tell you which it is before you spend anything.
FAQs

Cabinet boxes and doors typically hold up 15 to 25 years with normal use. In Denton’s climate, plan for the lower end – humidity swings between spring and late summer accelerate material movement, and hinges and slides wear faster when the substrate swells. Call (844) 651-3175 for an exact assessment of your kitchen.
Often, yes. Loose hinges, worn slides, and minor seam lifts are repairable if the substrate is sound. Once the cabinet floor or box is soft from water damage, replacement is the honest answer. We’ll tell you which one applies after we look. Call (844) 651-3175 for a free estimate.
A single cabinet or drawer component is usually a same-day job. A full kitchen remodel with cabinets, counters, and backsplash takes one to three weeks depending on material lead times. We give you the schedule in writing before work starts. Call (844) 651-3175 to get your date on the calendar.
We measure the actual bore and box dimensions, then source from Mr-Glass or a quality equivalent based on what you choose. We don’t carry stock and don’t guess at fit – the part is ordered to your measurements. Every job is background-checked technicians, uniformed, and a live person answers the phone 24/7. Call (844) 651-3175 for your free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












