A Bradford company - serving Denton, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Owens Corning · Denton

Owens Corning Kitchen Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Kitchen Remodeling: The Denton Owner’s Guide

Owens Corning kitchen remodeling in Denton runs $14,000 to $45,000 installed, with most projects landing in the middle of that range once layout changes, cabinetry, and surfacing are settled. That figure covers a written scope and a written price before any tool comes out. This page is built for the Denton homeowner who already knows what they want in an Owens Corning product – the specific part, the failed component, the spec that has to match – and needs it sourced, priced honestly, and set right.

Most owners discover a failure the same way. A cabinet door stops sitting flush against the frame. A run of trim pulls loose from the wall. An insulation-backed panel in a kitchen wall or soffit starts to sag or darken at the edge. Or a surface material lifts and the substrate underneath shows movement. In an older Denton house, that first sign is usually the start of a longer conversation.

General contractor measuring wooden wall studs with a tape measure in Denton, TX

Call (844) 651-3175

Which Owens Corning Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Owens Corning material shows up in kitchens in more forms than most homeowners expect: insulation batts and rigid foam board behind walls and soffits, sheathing, and the surface and trim products that sit over them. Identifying the right part starts with the label. Every Owens Corning package or board carries a product code, a thermal or dimensional rating, and a manufacture date, and that code is what a counter person or a supplier actually needs to match a replacement. Photograph it before anything comes off the wall.

For rigid foam and batt insulation, thickness and R-value both matter, and in Texas the R-value required behind a kitchen wall is not the same as what a northern-market package assumes. For sheathing and panel products, the nominal thickness and the edge profile (square or tongue-and-groove) have to match what’s already in the assembly or the fit is wrong.

The OEM-versus-aftermarket call depends on the part. For insulation and sheathing, a quality equivalent with the same R-value and thickness performs identically; there is no proprietary magic in the board. For trim and trim-adjacent components, the profile and finish matter more, and a generic substitute often shows the seam. We’re an independent contractor, not affiliated with Owens Corning, and we say so plainly so you know what you’re getting and from where. We source OEM when the spec requires it and equivalent product when it doesn’t, and we put that decision in writing on the estimate.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Kitchen Remodeling Is Failing

  • Soft or damp spots at the bottom of a kitchen wall. Insulation has taken on moisture, usually from a small leak or a poorly flashed penetration, and the board has lost its R-value and its rigidity. Left alone, it turns into a mold question.
  • A cabinet run that won’t stay level. The substrate behind or beneath the cabinets is deflecting, either from water damage or from an installation that skipped a shim. The cabinet isn’t the problem; what’s behind it is.
  • Trim that pulls away from the wall at the soffit line. Heat and humidity cycling in a Denton kitchen – summer attic temps pushing 140 degrees, then a winter cold snap – expand and contract the assembly. Fasteners back out and seams open.
  • Visible staining or darkening at panel edges. Moisture wicking along a cut edge or a poorly sealed penetration. By the time you see the stain, the material underneath is already compromised.
  • A backsplash or surface that sounds hollow when tapped. The adhesive or substrate bond has failed and the material is sitting loose. It will eventually crack or lift, and the substrate has to be corrected before anything goes back over it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with subway tile and a floating vanity

In Denton, replacing failed Owens Corning material as part of a kitchen project breaks down roughly like this. These are installed ranges: material, labor, and cleanup.

Scope Installed range
Kitchen remodel (full) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the number: how much failed material has to come out before new goes in, whether the substrate is sound or needs repair, whether a layout change moves plumbing or electrical, and which surface products you choose. We give you a written price before any work starts, and that price does not move at the door. Every completed project carries the 365-Day Done Right Promise – if the work fails inside that full year, we come back and correct it at no charge. No numbers that change once the truck rolls.

DIY or Call Us?

Some of this an owner can safely check. Photograph the label on any Owens Corning board before touching it. Tap the surface and listen for hollow spots. Look for staining at panel edges and at cabinet bases. Run a level along a cabinet run to see whether the problem is the cabinet or what’s behind it.

Where DIY goes wrong: pulling panels or sheathing that’s part of a weather or vapor barrier, or removing material that has been wet and could carry mold, without correcting what let the water in. You end up replacing the same panel twice. And any part of the work that touches a rough-in, an electrical circuit, or a gas line is not a homeowner job – that’s a licensed trade, full stop, and we’ll tell you so. If you’re not sure which side of that line you’re on, that’s the moment to call. Call (844) 651-3175 and we’ll square it away: written price, documented scope, signed guarantee in your hand at close. Cook in a Denton kitchen that’s done right.

General contractor measuring wooden wall studs with a tape measure in Denton, TX

FAQs

A remodeled primary suite with built-in wardrobes and a window seat

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch