







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Denton Owner’s Guide
If your PGT-manufactured paver driveway in Denton is showing lifted edges, rocking units, or a base that holds water, the fix usually isn’t a single “part” – it’s the bedding layer, edge restraint, and drainage detail underneath the pavers. A full paver driveway install in Denton runs $7,000 – $18,000; targeted repairs to failed sections typically fall well below that, and we schedule site visits within a normal working window (not same-day, because prep and materials don’t work that way on hardscape).

Owners usually figure out something’s wrong the same way: a paver rocks underfoot after a rain, or the edge course starts creeping toward the street. That creeping is almost always the edge restraint letting go, not the pavers themselves failing.
One clarification up front: Bradford Remodeling Co Denton is an independent service provider. We are not affiliated with PGT. We work with PGT-compatible systems and the standards those products are built to, and we service KraftMaid, Cambria, and Silestone products on other parts of the home.
Which PGT Models and Systems This Applies To

PGT hardscape products span paver styles, retaining systems, and driveway-rated units, and the compatibility that matters is rarely the brand name – it’s the unit dimensions, thickness rating, and the base spec the product was engineered for. A driveway-rated paver is typically thicker than a walkway paver, and swapping a thinner unit into a drive lane changes how the whole field handles Denton’s clay-heavy soil movement.
To identify your system, check three things:
- The paver edge or underside – many units carry a mold mark or spec stamp.
- The original install documents – spec sheets list the product series and thickness class.
- Measurements – record the unit length, width, and thickness in inches. That measurement plus the base depth is what a proper replacement is matched against.
OEM vs. aftermarket: for hardscape, a true “OEM replacement” is a matching unit from the same product line so color, texture, and thickness stay consistent with the installed field. Aftermarket equivalents can work – but only when thickness class and edge profile match, or the repair joint reads as a visible patch. We source matching units where they exist and tell you plainly when they don’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
Five symptoms show up again and again on Denton driveways, and each one points to a specific underlying cause:
- Rocking or loose units. The bedding sand has migrated or washed out under the paver, usually from a base that wasn’t compacted to depth. A single rocking paver is often the first sign the base layer is already compromised.
- Edge course creeping outward. The edge restraint – the system that locks the field in place – has failed or was under-anchored. Without it, the whole field spreads under load.
- Standing water after rain. Ponding means the slope or drainage path is wrong. Denton’s clay soil drains slowly, so a shallow grade error shows up fast on hardscape.
- Widening joint gaps or sand loss. Polymeric sand has washed out or the joint was never filled to spec. Missing sand lets water in and lets the field shift.
- Sunken sections near the apron or garage. Sub-base settlement from soil movement. This is a base-and-substrate problem, not a surface one, and patching it without addressing the base just moves the failure a few feet over.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included in Denton

A paver driveway installation in Denton runs $7,000 – $18,000. A full driveway replacement runs $5,000 – $14,000. Section repairs are typically quoted as a smaller line item once we see the extent of the base failure.
What drives the range:
- Square footage – a single-lane drive costs less than a wide, curved or multi-vehicle layout.
- Base prep – excavating and compacting to proper depth (the substrate is the buried structural layer that carries the load) is the biggest lever. Skipping it shows up within a season or two.
- Edge restraint and drainage – the details most failed driveways are missing.
- Unit selection – matching or upgrading the paver thickness class.
We give you a written price before any work starts – that’s The Garrison Standard, and it’s non-negotiable. No number at the door will differ from the number on the page. Completed work is covered by our 365-Day Done Right Promise: if it fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can check safely. Walk the drive after a rain and note where water pools. Look at the edge course for creep. Measure a paver’s thickness. Those three things tell you a lot.
What we don’t recommend is lifting and resetting a failed section yourself. The reason isn’t the paver – it’s the base. Redoing a bed without re-compacting the substrate to depth usually fails again, and a partial patch over a base that’s already moving tends to widen the failure rather than fix it. Excavation and mechanical compaction are the parts homeowners can’t replicate by hand, and they’re the parts that make the repair last on a Denton clay yard. If you want a straight read on whether your drive needs a patch or a reset, call (844) 651-3175 and we’ll walk you through the options.
Frequently Asked Questions

A properly built paver driveway with a compacted base, correct edge restraint, and functioning drainage typically lasts decades. The failure most Denton owners run into isn’t the paver – it’s the base or edge restraint going early, and that gets remedied well before the units themselves wear out. Call (844) 651-3175 to schedule a free estimate and we’ll assess which of the two is failing.
Sometimes yes – if the base under the failed section is still sound and the surrounding field isn’t creeping, a targeted repair can work. The tell is the edge course: if it’s stable and the joints aren’t widening, we’re usually talking repair, not replacement. We give you the written price for both options so you can see the difference. (844) 651-3175 for a free estimate.
A section repair is often a day or less; a full paver driveway installation runs multiple days depending on square footage and base prep. The single biggest variable is excavation and compaction depth, not the paver layout. We put the timeline in the written scope before work starts. Call (844) 651-3175 to book a free estimate.
We match by product line, thickness class, and edge profile – not just color, because a mismatched thickness is what causes a repair joint to fail first. We source matching units where available and tell you honestly when the original line has changed. We don’t stock parts and we don’t carry inventory on trucks – every unit is specified to your job. (844) 651-3175 for a free estimate.
Whether you’re pricing a driveway reset or just want a second opinion on whether that rocking paver needs attention now, call (844) 651-3175 for a free estimate. You’ll get a written price, a documented scope, and the signed 365-Day Done Right Promise in your hand at close. Live person answers, every time.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












