







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Denton Owner’s Guide
Schluter kitchen remodeling in Denton typically runs $14,000 to $45,000 installed, with the waterproofing and substrate layer (the materials under your tile that keep water out) accounting for a smaller but critical slice of that number. If you’re reading this because a Schluter membrane, curb, or profile has separated, cracked, or let moisture through, you’re in the right place. We install and correct Schluter systems across Denton kitchens, and we put the price in writing before any work starts.

Most owners discover the failure the same way: a soft spot near the sink, grout that keeps re-cracking no matter how many times it’s patched, or a tile that pops loose and reveals a dark, damp layer underneath. That dark layer is usually where the Schluter system gave out.
Which Schluter Models This Applies To

Schluter isn’t one product. It’s a family of systems, and the right replacement depends on which one you have. The two you’ll meet most in Denton kitchens are KERDI (the sheet-applied waterproofing membrane for wet areas) and DITRA (the uncoupling mat that isolates tile from substrate movement). Schluter also makes profiles like SCHIENE and JOLLY for tile edges, and KERDI-BOARD, a foam tile backer that replaces cement board.
To identify yours, look at the printed markings on the fleece. KERDI and DITRA both carry the Schluter name and a product code along the edge. Measure the membrane thickness: DITRA is about 1/8 inch, DITRA-XL is roughly 5/16 inch, and KERDI is a thin sheet with no appreciable build. Match the product code, not just the brand, before ordering. A DITRA mat won’t substitute for KERDI in a shower pan, and that mismatch is one of the most common reasons a “fixed” kitchen leak comes back.
On OEM versus aftermarket: Schluter’s own membranes carry the manufacturer’s warranty and are the safe choice under tile, but a quality uncoupling mat from a competing maker can match performance for some floor applications. Where it doesn’t pay to gamble is wet-area waterproofing. We’re an independent contractor, not affiliated with Schluter, so we’ll tell you straight when a genuine part is worth the difference.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Grout cracking in a repeating pattern. This usually means the uncoupling mat has detached from the substrate, so tile and floor are moving independently.
- Hollow-sounding tiles near the sink or dishwasher. A dull thud instead of a solid tap points to a membrane that has lost its bond and trapped moisture underneath.
- Dark staining at the base of a backsplash or along a curb. Moisture is getting past the waterproofing layer, often at an inside corner where the membrane was lapped the wrong direction.
- A soft or spongy patch on the floor. The substrate under the mat has swelled or rotted, meaning water has been sitting there for a while.
- Loose edge profiles or a lifted trim. Schluter profiles that pull away often signal movement in the assembly, not just a bad fastener.
In Denton, we regularly see these failures show up after a wet spring, when the clay-heavy soil under slab-on-grade homes shifts and stresses the tile assembly. That seasonal movement is exactly why an uncoupling layer matters here.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Replacing the failed Schluter layer in a Denton kitchen, along with the tile it sits under, generally lands inside a kitchen remodel range of $14,000 to $45,000 depending on square footage, tile selection, and how far the damage spread. A focused backsplash area with waterproofing repair runs $800 to $2,500. A full floor redo with new membrane and tile sits higher in the range. What drives the number: tile removal and disposal, substrate repair, the Schluter membrane itself, and setting materials.
We quote parts and labor as separate line items so you can see where the money goes. There’s no surprise invoice at the door; the written price is set before work begins. Every project carries the 365-Day Done Right Promise, which means if the installation fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe for you to do. Tap across the floor for hollow spots, look for repeated grout cracks, and check for staining at wet-area corners. What goes wrong with DIY is the installation itself: Schluter membranes demand specific thin-set coverage, correct lap direction, and a sealed seam at every joint. One skipped seam or a thin-set mixed too dry and the waterproofing fails silently for months. The repair isn’t the hard part to understand; getting the bond layer right is. If you’ve found a soft spot or recurring moisture, call (844) 651-3175. Estimates are free.
FAQs

How long should a Schluter system last in a Denton kitchen? A correctly installed Schluter membrane should outlast the tile above it, often 20 years or more. Failures almost always trace back to installation error or substrate movement, not the material itself. Call (844) 651-3175 for a look at yours.
Can it be repaired instead of fully replaced? Sometimes, if the failure is isolated to one area and the membrane underneath is still bonded. A full replacement is needed when the substrate has swelled or moisture has spread. We’ll tell you which you’re facing after a free assessment.
How long does the swap take? A focused backsplash-area repair can be a few days; a full floor replacement with new membrane and tile typically takes a couple of weeks once materials are in. Call (844) 651-3175 and we’ll scope the timeline in writing.
How do you source the part? We order genuine Schluter products by product code from the manufacturer’s supply chain, matched to your existing system. We don’t carry parts on a truck; the correct membrane is ordered for your job. Call (844) 651-3175 for a written quote.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












