A Bradford company - serving Denton, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Denton

Schluter Windows & Doors in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Windows & Doors: The Denton Owner’s Guide

We install Schluter-compatible window and door systems in Denton, and full window replacement here runs $4,500 – $15,000 depending on count, frame material, and whether the rough opening needs work. Impact-rated units, which matter more each year in Denton County hail season, land in the $8,000 – $25,000 range. We install with a written price before any work starts and back the finished job with our 365-Day Done Right Promise.

Contractor using a level to install tiles during bathroom remodeling in Denton, TX

Call (844) 651-3175

Most Denton owners find out something is wrong the same three ways: a window that won’t latch cleanly as the season turns, water staining the drywall under a sill after a north-Texas storm, or a door that drags on the threshold by August when the frame has swelled in the heat. Schluter sets the standard for tile and waterproofing transitions, and its window and door profiles are built to the same tolerances – which means when a piece of that system fails, it fails in a way you can usually see and feel before it becomes a bigger repair. We treat the diagnosis the same way we treat every job: what’s actually wrong, what it costs in writing, and what our guarantee covers once it’s corrected.

Key Takeaways

  • Window replacement in Denton: $4,500 – $15,000 installed; impact-rated units: $8,000 – $25,000.
  • Schluter-compatible profiles are sized by series and reveal depth – measure before you order anything.
  • Texas heat cycling is the number-one cause of seal and frame failure we see in Denton.
  • Every job gets a written price before work starts and a full-year written guarantee after.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s window and door line is built around trim and transition profiles that bridge the gap between a finished wall surface and the window or door frame – the pieces that hide the joint, shed water, and keep the assembly watertight. The critical fit details are the profile’s reveal depth (how far it projects past the frame face), its width, and the substrate it’s designed to bond to. A profile sized for thin-set tile on cement board isn’t the same part you’d use over a thicker substrate, and mixing them is where most of the callbacks we see in Denton start.

To identify the right part, pull the label from the original packaging if you still have it, or measure the profile’s visible width and depth with a caliper – a tape measure won’t get you close enough on a trim piece. Check the extrusion for a stamped series code; Schluter marks its profiles, and that code is what you cross-reference.

On the OEM-versus-aftermarket question for Schluter specifically: the profiles are precision extrusions, and the tolerances matter because they’re designed to sit flush with tile and frame surfaces. A generic equivalent that’s close but not exact will show a lip or a gap you’ll see every day. We specify the OEM part when fit is the whole point, which for these profiles it usually is. We don’t stock parts and we don’t carry inventory on a truck – we source the correct part to the job, which is why the measurement step isn’t optional. Bradford Remodeling Co Denton is an independent service provider and is not affiliated with Schluter.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Windows & Doors Is Failing

  • Water staining or soft drywall under the sill. The profile’s seal or the flashing behind it has failed, letting water past the joint. In Denton, this often shows up after the first big spring storm rather than gradually, because wind-driven rain finds the gap all at once.
  • A visible gap or lip where the profile meets the tile or frame. The profile wasn’t set to the correct reveal depth, or the substrate shifted. This is a fit failure, not a wear failure, and it’s the one that reads as cosmetic until water gets in behind it.
  • Cracking or separation at the corner joints. Thermal cycling – 100°F July afternoons down to 40s in winter – expands and contracts the frame and profile at different rates. When the sealant at the joint gives, that’s the first sign.
  • A window or door that won’t latch or close flush. The frame has moved, and the profile is now holding it off square. By August in Denton, we see a lot of doors that drag on the threshold simply because the frame swelled in the heat.
  • Condensation on the interior glass edge or a foggy pane. The sealed unit’s edge seal has failed, which is a window-unit problem sitting behind the Schluter trim – replacing the profile alone won’t fix it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A small remodeled galley kitchen with cabinets to the ceiling

Window replacement in Denton runs $4,500 – $15,000 installed; impact-rated window installation runs $8,000 – $25,000. What moves you within that range: the number of units, frame material (vinyl sits at the low end, wood-clad and impact-rated at the high end), whether the rough opening needs repair, and whether the Schluter profiles behind the trim have to be reset or replaced along with the window. A single failed profile reset is a small job; a full window swap with new trim is at the top of the range.

Every quote we hand over is itemized – parts, labor, and any substrate repair called out as a separate line so you know what you’re paying for before we start. No numbers that move at the door. The finished work carries our 365-Day Done Right Promise: if the install fails within that year, we come back and correct it at no charge, and you hold that guarantee in writing when we close out the job.

Scope Installed Price Range (Denton)
Window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000

DIY or Call Us?

Here’s the honest split. You can safely check whether a window or door is failing: look for water staining, run your hand along the profile joint for a gap, and check that the unit latches and closes flush. That much tells you whether you have a real problem worth a call.

Where DIY goes wrong on this part is in the reset – pulling a window or door profile to reseat it means opening the watertight seal around the opening, and if the flashing and substrate behind it aren’t put back correctly, you’ve traded a cosmetic gap for a leak that shows up six months later. The measurement step is also unforgiving: order the wrong reveal depth and you’re out the cost of the part and the time. On top of that, opening up an exterior wall in Denton means dealing with whatever the frame has done in the heat, which is rarely as simple as it looks once you’re in.

If you want a straight answer on what’s failing and what it costs, call us at (844) 651-3175. A live person answers, 24/7, and the estimate is free.

FAQs

A finished basement family room with a media wall and wet bar

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled staircase with wood treads and a slim metal railingA walk-in pantry with wood shelvingA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porch

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch