







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Denton Owner’s Guide
We install and remodel bathrooms with Tamko product in the build, and a full bathroom remodel in Denton typically runs $9,000 – $28,000 installed, with smaller baths landing between $5,000 and $12,000. Most Denton owners don’t come to us because they picked Tamko on purpose. They come because something failed. A ceiling stain appears below the upstairs bath after a spring storm. The shower pan flexes when they step in. A tile edge lifts and the grout line behind it crumbles. Tamko makes roofing, waterproofing, and building-envelope products that end up under and around bathroom construction, and when one of those layers gives out in a Denton house, the damage shows up in the room below before it shows up in the bathroom itself.

Which Tamko Models This Applies To
Tamko’s footprint on a bathroom job is real but indirect, and knowing which product you’re dealing with changes the fix. Their roofing lines (Heritage shingles among them) sit above second-floor baths, and a roof leak at a vent boot or chimney flashing can track straight down into a bathroom ceiling. Their waterproofing and underlayment products sit beneath tile and behind wet walls. Heritage shingle runs are identified by the wrapper on the bundle and by the shingle’s exposed tab height, which measures roughly 5¾ to 6 inches depending on the series; matching a repair patch means matching that profile, not just the color name. On the waterproofing side, the printed label on the roll or pail (product name, coverage per unit, and lot) tells you what membrane is actually behind your tile, and that matters because a repair has to bond to the same chemistry. On the OEM-versus-aftermarket question, we’re straightforward: for membranes and flashing we match spec and manufacturer compatibility rather than chase a cheaper equivalent, because the whole point of the product is that it holds water out. We are an independent remodeling company, not affiliated with Tamko, and we work with KraftMaid, Cambria, and Silestone on the finish side of the same room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
These are the signals that tell us the product layer above or behind your bathroom has started to give. Each one has a cause behind it, and the cause is what we price.
- A brown ring on the ceiling below the bath. Water is getting past the roofing or flashing above and traveling down a joist. In Denton, where summer storms drop hard rain in short bursts, a small flashing gap can push enough water through in one storm to stain drywall.
- Lifted tile or a hollow sound when you tap the floor. The waterproofing layer beneath the tile has lost its bond, often because it was installed over a damp substrate. Once it lifts, moisture gets under the tile and the repair is bigger than the tile.
- Grout that keeps cracking along the same line, no matter how often it’s patched. Movement in the substrate below, not a grout problem. Re-grouting hides it for a season; the layer underneath keeps moving.
- A shower pan that flexes or a soft spot near the drain. The pan or its waterproofing has failed and water is sitting where it shouldn’t. This one gets worse quietly and shows up as rot in the framing below.
- Musty smell that comes back after cleaning. Moisture is trapped in a wall or floor assembly. You can’t smell a membrane, but you can smell what grows behind one that isn’t doing its job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Denton, installed, with the parts and labor together rather than a mystery line-item split at the end.
| Job | Installed range |
|---|---|
| Full bathroom remodel (Tamko product in the assembly) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement (pan, waterproofing, tile) | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Vanity installation | $800 – $3,000 |
What moves the number: whether the roof or flashing above has to be opened, how far water traveled before it was caught, and whether the assembly is a simple pan-and-tile job or includes re-framing soft wood. We give a written price before any work starts, every time, and it doesn’t change at the door. Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. You get the guarantee in your hand at close, along with a clean site and a documented scope of what was done.
DIY or Call Us?
There’s a real split here, and we’d rather you know it than guess. You can safely check a few things yourself: look at the ceiling below the bath after a hard rain, tap tile to listen for hollow spots, check for flex in the shower pan, and read the label on any exposed membrane or shingle wrapper so you know what product you’re dealing with. Where it goes wrong is opening a roof or a wet wall to chase a leak. Roof work at height and re-flashing around a vent are genuinely dangerous, and a membrane repair that doesn’t bond correctly just moves the leak. That’s the point where the honest move is a trained professional. Our technicians have up to 22 years of experience, and every one of them is background-checked and uniformed, so you know who’s at your door. Call (844) 651-3175 and a live person answers, day or night, to schedule a free estimate.
FAQs

A properly installed Tamko roofing or waterproofing product can hold for decades, but in North Texas heat the clock runs faster on the edges. Shingle sealant strips soften and re-seal through repeated 100-degree summers, and flashing sealant dries and cracks years before the shingle itself fails. That’s why Denton roof leaks so often start at a vent boot or a chimney rather than in the field of the roof. Call (844) 651-3175 for an exact quote on yours; estimates are free.
Often yes, and we’ll tell you when a repair is the right call. A single failed flashing or a localized membrane lift can be corrected without tearing out a whole bathroom. But when water has reached the framing or the pan has failed, a patch just delays the bigger bill. We price both ways in writing so you can see the difference. Call (844) 651-3175 to schedule your free estimate.
A targeted repair is usually a single visit; a full bathroom remodel in Denton typically runs a few weeks depending on scope. We put the schedule in writing alongside the price so there’s no guessing about when the crew is there and when the room is back in service. Call (844) 651-3175 and we’ll walk you through it.
We match the product to the spec already in your assembly, which is why reading the label and taking real measurements up front matters. For membranes and flashing we match manufacturer compatibility rather than substitute a cheaper equivalent, and we don’t claim to stock parts or carry them on a truck; we source what the job calls for. Every material we install comes with its manufacturer specs and warranty behind our own guarantee. Call (844) 651-3175 for a free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












