







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Home Additions & ADU: The Denton Owner’s Guide
If you’re building a home addition or ADU in Denton, Tamko compatibility usually enters the conversation through the roof: Tamko shingles and low-slope roofing products are what many Denton additions sit under, and the part that fails first is almost always a roofing component near the tie-in where the new structure meets the existing house. Installed cost for a code-compliant addition in Denton runs $45,000 – $130,000, with ADUs at $90,000 – $220,000; a dedicated ADU constructed on your lot typically lands at $90,000 – $220,000. Owners usually discover the problem as a slow ceiling stain in the new room, shingle granules in the gutter, or a step flashing that lifted after a summer of thermal movement. We’re an independent contractor, not affiliated with Tamko.

Which Tamko Models This Applies To

Tamko’s residential roofing line covers Heritage and Heritage Premium laminated shingles, the Thunderstorm and Stormfighter impact lines, and the low-slope products like TAM-ALOY and Aristokrat under the commercial side. The tie-in flashing, drip edge, and roofing underlayment that touch a new addition don’t carry a “model” number the way a shingle does, so in practice you identify the right replacement part by matching three things: the shingle series named on the bundle wrap or the original contract, the exposure measurement (Heritage is a standard 5-5/8″ exposure), and the pitch and underlayment spec on the addition’s plans.
The OEM-versus-aftermarket choice matters here. Tamko-branded accessories and their spec-matched equivalents from manufacturers that publish the same dimensional data are both defensible when the part is installed to spec and the warranty chain is documented. What’s not defensible is a generic piece that doesn’t match the exposure or the low-slope membrane grade the spec calls for. We work to plans and manufacturer specs so the new addition’s roofing ties into the existing Tamko system with traceable materials, and we keep the paper trail clean for warranty purposes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Home Additions & ADU Is Failing
These are the symptoms we hear most in Denton, and what each one usually points to:
- Granules collecting in the gutter or at the downspout outlet. Normal wear sheds some granules over a roof’s life; a sudden deposit after a hail event means the shingle mat has been bruised and the protective layer is failing.
- A water stain on the ceiling of the new room. Almost always the tie-in at the wall line where the addition meets existing framing, not the field of the roof itself. Step flashing that was nailed instead of woven, or that lost its seal after thermal movement, is the usual culprit.
- Visible lifting or separation at the valleys or rake edge. Denton’s summer heat cycles shingles between 60°F nights and 105°F afternoons, and flashing that was fastened short instead of allowing expansion will lift within a few seasons.
- Shingle edges that look curled or cupped. Poor attic ventilation in a new addition – not enough intake or ridge exhaust – bakes the underside of the deck and shortens shingle life by years.
- A soft or spongy spot near the drip edge. Water has gotten behind the edge and saturated the decking or fascia. By the time you feel it, the wood underneath usually needs replacement too.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Denton, the roofing repair around an addition’s tie-in typically runs $400 – $1,800 for a localized fix, and a full roof replacement on the addition (if it was under-built) runs $8,000 – $20,000. The overall addition project, from foundation through finish, is $45,000 – $130,000 depending on size, whether it’s a primary suite or a garage conversion, and site conditions. Garage conversions – the most common ADU path in Denton – run $30,000 – $80,000. ADU construction from the ground up is $90,000 – $220,000.
What moves the range: square footage, foundation type on Denton’s expansive clay soils, whether the addition needs its own HVAC and electrical panel (a full panel upgrade alone is a real line item), and how much roof has to be torn back to make the tie-in honest instead of patched. Every project gets a written price before any work starts. No surprises at the door. All completed work is covered by the 365-Day Done Right Promise: if it’s not done right, we return and correct it at no charge inside that year. Parts and labor are broken out in the written scope so you can see what you’re paying for.

DIY or Call Us?
Here’s the honest split. An owner can safely climb a ladder (with someone footing it) and check the ceiling inside the new room for stains, look at the gutters for granule deposits, and photograph the flashing from the ground with a zoom lens. What you shouldn’t do is get on a pitched roof to pry shingles back or re-flash a tie-in – the risk of a fall is real, and a bad patch is the kind of thing that looks fine until the next rain finds it. Roof work near height and flashing detail is trained-professional territory.
Our technicians – up to 22 years of experience across the crew – assess the tie-in, the decking, and the ventilation, and give you a written scope and price before any tool comes out. Call (844) 651-3175 to schedule your free estimate. A live person answers, day or night.
FAQs

A Tamko Heritage shingle rated for 25 to 30 years is realistically 18 to 22 years in North Texas, shorter on an unvented low-slope section. The heat is the honest enemy; proper intake and ridge ventilation is what closes that gap. If your addition’s roof is already 15 years old and showing granule loss, call (844) 651-3175 for an assessment – estimates are free.
Yes, in most cases a localized tie-in failure or flashing separation is repaired without replacing the whole roof. What can’t be repaired is a shingle mat that’s been bruised by hail or saturated decking – those need replacement. We’ll tell you straight which one you’re looking at, and the written scope shows exactly what’s included. Call (844) 651-3175 for an exact quote.
A localized flashing or tie-in repair is typically a one-day job; a section replacement runs two to three days, weather permitting. Full roof replacement on the addition is three to five days depending on size and access. We’ll give you a timeline in writing before the crew shows up.
Through a documented roster of name-brand materials – Tamko alongside GAF, CertainTeed, and Owens Corning – so the spec is traceable and the manufacturer warranty chain stays intact. We also install GAF, James Hardie, Therma-Tru, and on the interior side KraftMaid, Cambria, and Silestone. Every part in the written scope has a spec sheet behind it. Call (844) 651-3175 for a free estimate on your Denton addition or ADU.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












