A Bradford company - serving Denton, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower
T
Therma-Tru · Denton

Therma-Tru Bathroom Remodeling in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
A remodeled staircase with wood treads and a slim metal railing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Bathroom Remodeling: The Denton Owner’s Guide

Installing a Therma-Tru-compatible bathroom remodel in Denton runs $9,000 to $28,000 depending on scope, fixtures, and whether the doorway and enclosure get replaced alongside the finish work. A small bath remodel lands at $5,000 to $12,000, while a walk-in shower installation runs $4,500 to $12,000. We work with Therma-Tru door and entry systems, along with KraftMaid, Cambria, and Silestone materials, and we give you a written price before any work begins.

Contractor checking level of a custom shower niche during bathroom renovation in Denton, TX

Call (844) 651-3175

Owners usually discover a failing part on a thermo-tru component the same way: the door no longer latches flush, the glass fogs between the panes, or a hinge sags so the shower entry drags. What starts as a cosmetic annoyance in a Denton bathroom becomes a water-intrusion problem once the seal breaks. This page covers how to identify the right part, what installation costs, and where the repair genuinely stops being a DIY job.

Which Therma-Tru Models This Applies To

A tile setter installing wall tile in a shower

Therma-Tru makes exterior and interior door systems, and their bathroom-facing products show up most often as privacy glass doors, framed bath entries, and the sidelight and transom assemblies that go with them. Model identification starts on the door or frame label, usually a sticker on the hinge side or a stamp on the top edge of the slab. Write down the full series name and any size code before you order anything.

The compatibility gotcha most Denton homeowners hit is size tolerance. Therma-Tru frames are milled to specific rough-opening dimensions, and a replacement slab or glass unit that’s even an eighth of an inch off won’t seat in the existing frame without rework. Measure the rough opening, not the old panel. For glass, confirm the glazing type and whether your unit is tempered or laminated, because a bathroom entry typically requires safety glazing per code.

On OEM versus aftermarket: Therma-Tru-branded replacement glass and hardware match the original frame exactly and carry the manufacturer’s warranty, which is the safer path when the door is under a decade old. Quality aftermarket hinges and weatherstripping are fine for hardware swaps and often cost less, but a full glass or frame replacement is where OEM matters. We’re an independent service provider, not affiliated with Therma-Tru, so we source the correct part to your model rather than pushing a generic fit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Bathroom Remodeling Is Failing

These are the five failures we see most in Denton bathrooms, each tied to what’s actually happening behind the symptom.

  • Fogging or condensation between the glass panes. The insulated glass unit’s seal has failed and moisture is trapped inside. Once that happens, the unit can’t be dried out; it has to be replaced.
  • The door won’t latch or sits proud of the frame. Usually a hinge that’s loosened from the jamb or a frame that’s shifted with seasonal movement. Left alone, the gap lets bathroom humidity into the wall cavity.
  • Dragging or squealing when the door swings. Worn hinge bearings or a sagging top hinge. The fix is often a hardware swap, but a sagging door can also mean the rough opening has settled.
  • Water staining or soft spots at the threshold. The sill seal has failed and moisture is wicking into the substrate. This is the one to catch early, because rot in the framing costs far more than a new seal.
  • Peeling paint or bubbling at the frame edges. Interior moisture is escaping past the weatherstripping or glazing seal. It signals the door’s weather seal has given out.

Replacement Cost & What’s Included

Installed Therma-Tru bathroom remodeling in Denton runs $9,000 to $28,000, and that figure covers the written scope from demo through finish. A walk-in shower installation is $4,500 to $12,000; a tub-to-shower conversion is $3,500 to $10,000; and a bathroom vanity installation is $800 to $3,000 if you’re only updating the vanity. A small bath remodel is $5,000 to $12,000.

Contractor checking level of a custom shower niche during bathroom renovation in Denton, TX

What drives the range: glass type and size, whether the frame or rough opening needs rework, finish upgrades, and whether the bathroom entry door is part of the scope. We separate parts and labor in the written price so you can see exactly what the component costs versus the install. Every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge. No numbers move at the door.

Scope Installed Range (Denton)
Bathroom Remodel $9,000 – $28,000
Small Bathroom Remodel $5,000 – $12,000
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Bathroom Vanity Installation $800 – $3,000
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself: measure the rough opening, read the model label, note the glazing type, and confirm whether the latch, hinge, or glass is the actual failure. Replacing a loose strike plate or tightening a hinge screw is fair DIY territory.

Where DIY goes wrong is the structural and moisture side. Replacing a glass unit or reseating a frame requires the rough opening measured to the eighth of an inch and the seal done right, or you’ll be back to water intrusion within a season. Rot behind a soft threshold is worse, because what looks like a small fix often reveals framing damage that needs proper repair, not a patch. The frame and glazing work is where accuracy matters more than speed, and that’s the part worth handing to a trained installer. Call (844) 651-3175 and we’ll walk through what your job actually needs.

FAQs

A single-story rear room addition with tall windows and a new patio

Get a Written Price Before Any Tool Comes Out

Bradford Remodeling Co Denton works from The Garrison Standard: a documented scope, a written price, and the signed 365-Day Done Right Promise in your hand at close. Background-checked, uniformed technicians show up on every job, and a live person answers the phone 24/7, not a voicemail. We work with a documented roster of brands including Therma-Tru, KraftMaid, Cambria, Silestone, Kohler, and Moen, so specifications stay traceable. Call (844) 651-3175 to schedule your free estimate for your Denton bathroom project.

Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch