







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Denton Owner’s Guide
Toto-compatible home additions and ADU work in Denton runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, priced in writing before any work starts. This isn’t a part swap with a same-day turnaround; additions and ADUs are planned construction, and Denton permit review and inspection schedules set the timeline, not a dispatch window.

If you landed here searching for a Toto part, you’ve probably found the wrong page. We install Toto bath and kitchen fixtures as part of the additions and ADU work we build in Denton; we don’t stock or sell Toto replacement parts, and we’re an independent contractor, not affiliated with Toto. If you’ve got a failing fill valve or flapper, the honest answer is to call a licensed plumber who carries that part, not a remodeler. What we can help with is the bigger picture: a Denton addition or ADU where the Toto fixtures are specified, sourced correctly, and installed to spec the first time.
Which Toto Models This Applies To

Toto’s residential catalog splits into two lines that matter for an addition or ADU build. The WASHLET bidet seat line (S350e, C5, K300) needs a dedicated GFCI outlet within about three feet of the toilet flange and a supply line with a shutoff, and the NEOREST integrated toilets need a floor-mounted rough-in at a specific setback from the finished wall. Get either wrong and you’re moving plumbing after drywall, which is the expensive way to learn the lesson.
Toto’s spec sheets list the exact rough-in dimensions for each model. Pull the model number off the label on the tank or under the bowl rim before your build drawing is finalized, and hand that sheet to whoever runs the rough-in. The same applies to Toto faucets (the Transitional and EcoPower lines) and to the undermount sinks Toto pairs with its vanities: basin dimensions drive the countertop cutout, and a cutout locked in before the basin is on site is a cutout you may be cutting twice.
OEM vs. aftermarket matters less here than it does for a replacement part, because the whole fixture is being specified new. Still, confirm the series matches the drawing: a WASHLET seat and a NEOREST toilet are not interchangeable, and swapping one for the other after rough-in is a change order, not a favor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
Additions and ADUs don’t “fail” like a valve does, but they develop problems you can see and smell. Here’s what we find in Denton homes, and what’s usually behind it.
- Water stains at the ceiling below a new bath. The most common cause is a shower pan or supply line rough-in that wasn’t pressure-tested before the substrate went down. By the time the stain shows, the leak has been running for weeks.
- A toilet that rocks or seals poorly in a new bathroom. A flange set below the finished floor height rather than flush with it will flex every time someone sits down. That’s a rough-in error, not a wax ring problem.
- Drafts along the new exterior wall. Insulation gaps at the plate line or around penetrations, often where a vent or supply line was drilled after the wall was closed. Denton’s summer heat and winter cold snaps both find them.
- Slab cracks radiating from a new bath or kitchen wet wall. Plumbing that wasn’t sleeved or trenched to depth before the pour. This is the one that costs the most to correct, because fixing it means opening the slab.
- Doors and windows that bind months after completion. A foundation or framing issue that showed up too late to catch. In Denton’s expansive clay soils, a footing designed for the wrong load class will move, and it will take the door frames with it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
The numbers here are for the work, not a part. A home addition in Denton runs $45,000 – $130,000, and a detached ADU runs $90,000 – $220,000. A garage conversion, if that’s the route you’re weighing, runs $30,000 – $80,000. The lead figure for this page is the addition range.

What moves the number: square footage, foundation type (slab, pier-and-beam, or a mix), whether the new space is on a wet wall that has to tie into the existing drain line, and how much Toto fixture work is specified. A single full bath with a NEOREST and a WASHLET adds fixture cost and rough-in complexity; adding a half-bath off an existing drain line costs less than a full bath on a new slab. Every project gets a written line-item price before work starts, and Denton permits are pulled in the homeowner’s name and inspections scheduled by us. The work is covered by the 365-Day Done Right Promise: if something we built fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: look for water stains under a new bath, feel the floor around a toilet for softness or flex, and check that the Toto WASHLET’s outlet is GFCI-protected. Those are observations, not repairs.
Where DIY goes wrong on additions and ADUs is anything structural or wet: moving a drain line, roughing in a new supply, cutting into a load-bearing wall, or tying into the slab. These require permits and inspection in Denton, and unpermitted work becomes a disclosure problem at resale and an insurance problem if it fails. Hiring a licensed plumber or electrician for a fixture swap is the right call for small jobs. For a full addition or ADU, call us at (844) 651-3175 for a free estimate. We’ll show up with a written price in hand.
FAQs

How long does an addition or ADU take in Denton? Expect four to eight months for an addition and six to twelve months for a detached ADU, depending on permit review and inspection scheduling. The timeline is written into your scope before work starts.
Can this be repaired instead of rebuilt? Sometimes. A leaking shower pan or a poorly set toilet flange can often be corrected without a full rebuild. Slab or foundation problems usually can’t. We’ll tell you which one you’re looking at before quoting.
Can you handle a Toto-specific spec in the build? Yes. We specify the model on the drawing, confirm the rough-in dimensions before plumbing goes in, and source the fixtures to that spec. We don’t carry Toto parts, but we do build to Toto’s published dimensions.
What if something fails in the first year? The 365-Day Done Right Promise covers it. We come back and fix it at no charge. Call (844) 651-3175 for an exact estimate on your Denton project. Estimates are free.
We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surfaces side of these builds. Call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












