







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Denton Owner’s Guide
If you own a Unilock paver driveway in Denton, the failure is almost never the paver itself. It’s the base, the joint sand, or the edge restraint giving way, and the repair usually costs far less than a full replacement. A new Unilock paver driveway in Denton runs $7,000 – $18,000 installed, but a stabilizing or re-laying repair on an existing one often lands well under that. We’re an independent service provider, not affiliated with Unilock, and we install and repair Unilock-compatible hardscape.

Owners typically call after one of three things: a rut or dish forming where the car parks, joints that were sanded last spring and are empty again by August, or a paver on the driveway edge that has tipped up and now catch a tire. Those three symptoms lead back to the same part ninety percent of the time, and it isn’t the paver.
Which Unilock Paver Systems This Applies To

Most Unilock driveway failures on Denton properties come from one of three product lines. The Brussels Block line uses a tumbled, thicker profile and is common on older driveways. The newer Beacon Hill and Elegance lines stack and thin differently. The exact installed height, edge restraint spec, and joint-sand grade differ between them. Identifying your line matters because matching a replacement paver from the wrong series will be visibly wider or thinner in the field and will telegraph through the driveway.
The reliable way to identify your system is to measure a single paver to the nearest eighth of an inch (width, length, thickness) and photograph the joint pattern. That measurement plus the system photo lets us match the correct series without guessing. Unilock sells through distributors and supply yards, not direct to a homeowner, so a genuine match usually requires knowing the exact series, not just the brand name. If we can’t verify the series from the measurement and photo, we recommend re-laying a section with a close aftermarket match instead of mixing in a paver that doesn’t sit flush. KraftMaid, Cambria, and Silestone are separate materials for interior work, not part of the hardscape.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway Is Failing
These five symptoms point to different underlying causes, and the cause determines whether you’re looking at a repair or a section replacement:
- Rutting or a low dish where cars park. The base aggregate has compacted unevenly. This is a base failure, not a paver failure, and it is common on Denton driveways that sit over heavy clay soil.
- Joint sand washing out twice a year. The wrong joint sand grade, or a joint too wide for the sand to bridge. A higher-grit polymeric sand holds the joint better than a basic washed sand.
- Edge paving tipping up or splaying outward. Missing or failed edge restraint. Without a solid restraint, the outer row of pavers drifts toward the yard with every freeze-thaw cycle.
- Standing water after a summer storm. The slope or drainage pitch is failing. North Texas thunderstorm runoff needs a drainage path, and a flat section traps it against the paver face.
- Shifting or rocking pavers underfoot. Missing bedding sand or a void in the base. This is the one that escalates fastest if it’s left alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Common Denton pricing, installed, with the written scope itemized before any work begins:
| Work | Installed Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
The range on a full install is driven by square footage, paver series, and base depth. Older Denton driveways sometimes need a deeper base over expansive clay, which pushes toward the top of the range. Every written price covers demo, base prep, edge restraint, joint sand, and cleanup, and it doesn’t move once the work starts. A section repair or re-sand sits well under the install range. The whole job is backed by the 365-Day Done Right Promise: if the work fails within a full year of completion, we come back and correct it at no charge.
DIY or Call Us?
You can safely check three things yourself: measure a paver to the nearest eighth inch, photograph the joint pattern, and note where the driveway holds water after rain. That information helps get an accurate quote and saves a wasted trip. What you shouldn’t attempt yourself is lifting and re-bedding paver sections over a compacted base. A paver set into an unverified base looks fine for a season and fails the following summer. Pulling a paver to inspect the base is a heavy lift and a fresh pair of hands too. Call (844) 651-3175 with your measurements and a photo, and we’ll give you an honest read on whether it’s a repair or a replacement before anyone drives out.
FAQs

How long does a Unilock paver driveway last in Denton? A properly based and restrained Unilock driveway typically lasts 20 to 30 years in North Texas. The lifespan is set by the base and restraint, not the paver face, so a driveway with failing edge restraint can show trouble in under 10 years.
Can it be repaired instead of replaced? Yes, most of the time. Ruts, failed joints, and tipped edges are usually section repairs or a re-sand, and cost a fraction of a full install. Call (844) 651-3175 with a photo for a straight answer.
How long does a repair take? A re-sand or edge-restraint repair is typically a one-day job. A section re-lay over a base fix usually runs one to two days depending on square footage and drainage work. Every estimate spells out the day count in writing.
How do you source the right Unilock paver? We match by exact series and measurement against Unilock supply, not by color guess. If a direct match isn’t available, we source a compatible aftermarket paver from a documented supplier so it sits flush. Call (844) 651-3175 to schedule your free estimate.
Call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate on your Unilock driveway or paver project. We’ll measure, photograph the system, and give you a written price in Denton before any work starts, backed by the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












