







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling in Denton, TX: The Owner’s Guide
Unilock kitchen remodeling in Denton runs $14,000 – $45,000 for a full kitchen, with layout, cabinetry, and finishes driving where in that band you land. We install documented name-brand materials throughout, including KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, Kohler and Moen fixtures, and Unilock hardscape and masonry products where the job calls for them. Every project gets a written price before any work begins, and every finished project carries our 365-Day Done Right Promise.

Denton owners usually discover a problem the same way: they’re standing in a kitchen they’ve been meaning to update, looking at a 1990s tile floor that’s cracked along the slab, cabinets that have swollen at the toe kick, or a backsplash pulling away from the wall. The failing piece isn’t one part you can swap at a hardware store. It’s a system of materials that have reached the end of their useful life together. That’s the honest picture, and it’s what a real remodeling assessment addresses.
Key Takeaways
- Full kitchen remodeling in Denton typically lands between $14,000 and $45,000 installed.
- Smaller kitchens and partial scope work can run $9,000 – $20,000.
- The most common failure we see in Denton is moisture intrusion under sink cabinets and along slab floors.
- Bradford Remodeling Co Denton is an independent remodeling contractor and is not affiliated with Unilock.
- Every project includes a written price before work starts and a full-year written guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Unilock Products Apply to a Kitchen Remodel
Unilock is best known for hardscape and masonry, and where it enters a kitchen is specific: exterior pavers for patios and walkways that tie into an outdoor kitchen, and wall or accent masonry where a kitchen opens to an outdoor living space. If you’re pricing a kitchen remodel that includes an outdoor entertainment area, a covered patio, or a walkway connecting to an exterior door, Unilock products are part of that scope. Inside the kitchen itself, the product set is KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures.
Identifying the right Unilock product for an existing installation is straightforward if you know where to look. Check the underside of any paver edging for a stamp, look at the packaging left behind if the prior owner stored spares, and measure the facing dimensions to the nearest eighth of an inch. Unilock product lines come in specific modular sizes, and a mismatched size or color blend will show immediately against existing work. If you can’t identify the exact line, photographing the surface with a tape measure in frame gives us enough to source a match. We work with the documented Unilock product catalog, so we’re not guessing at the spec.
OEM versus adapted product
For Unilock masonry that ties in to existing work, the right answer is usually the OEM product line, because color, texture, and modular size have to match what’s already there. A substitute product that’s “close” will read as a patch from ten feet away. For interior kitchen components, the OEM-versus-alternative decision is less rigid; cabinets, surfaces, and fixtures are specified by the manufacturer’s documented range, and we recommend the option that best serves the room rather than the one that’s simplest to source.
Signs Your Kitchen Remodel Scope Is Undersized
Most Denton homeowners don’t wake up deciding to remodel a kitchen. They discover over a few seasons that something has failed and can’t be patched. Here are the five symptoms we see most, each with the underlying cause.
- Cabinets that swell or delaminate at the toe kick or under-sink floor. This is moisture migrating from a slow plumbing leak or from slab wicking, and the cabinet box is absorbing it. By the time you see the swelling, the cabinet is generally not repairable.
- Tile flooring that cracks along a straight line across the room. This usually follows a slab crack underneath, and it means the tile was set over a substrate that’s moving. Denton’s expansive clay soils push and pull with seasonal moisture, which is why slab cracks show up more here than in stable-soil markets.
- Backsplash tile separating from the wall at the top or bottom edge. Adhesive failure, often from grease vapor or from substrate movement behind the tile. Once tiles are lifting at the edges, re-grouting won’t hold them.
- Countertop seams that have opened or laminate that’s peeling at the front edge. Water has entered the seam and degraded the substrate or the adhesive. Stone surfaces with failed seams can sometimes be re-seamed; laminate cannot be recovered.
- A dropped or soft spot in the floor in front of the sink or dishwasher. Subfloor damage from a slow leak under the sink or dishwasher, which often has been running unnoticed for years behind the cabinet backs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost for Kitchen Remodeling in Denton
The $14,000 – $45,000 range covers a full kitchen remodel: demo, rough-in adjustments, cabinetry, counters, backsplash, flooring, lighting, and finish carpentry. Where you land in that range depends on cabinet grade and quantity, surface material (Cambria runs higher than Silestone at most spec levels), whether the layout changes, and whether plumbing or electrical needs to move. A partial-scope kitchen or a small kitchen that keeps its footprint will usually fall into the $9,000 – $20,000 band.
Line-item ranges for Denton, quoted the way we actually break out the work:
| Scope item | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Every price above is a written price before work starts. The number you’re quoted is the number you pay, and there are no change orders at the door. The work is covered by the 365-Day Done Right Promise – if it fails within a year of completion, we return and correct it at no charge.
DIY or Call Us?

Some of this is safely in a homeowner’s hands to check. Pulling a drawer out and inspecting the cabinet interior for water staining, checking under the sink with a flashlight for active drips, and tapping along a tile line to listen for hollow spots all take minutes and give you real information. So does photographing cracks with a tape in frame so the length is documented.
Where DIY goes wrong is anything involving the substrate or rough-in. Pulling tile to “see what’s underneath” often finds a slab crack or subfloor damage that turns a straightforward replacement into a repair project, and the tile you removed is no longer a match for what’s around it. Moving a plumbing line or an electrical circuit to accommodate a new cabinet layout requires a permit and an inspection, and doing it without one creates a problem at resale. We pull permits and pass inspections on every project that requires them. If you’re getting numbers to decide whether to remodel, call (844) 651-3175 and we’ll give you a written estimate. No pressure, no scarcity tactics.
FAQs
A well-installed kitchen with quality cabinetry and quartz surfaces should give you 20 – 30 years of service, though Denton’s clay soils and seasonal humidity shift stress the flooring and cabinet substrates faster than in drier markets. Cabinet boxes and countertops typically outlast flooring and backsplash. Call (844) 651-3175 for an exact assessment of what’s failing in your kitchen; estimates are free.
Sometimes. A stone countertop with an open seam can often be re-epoxied and re-polished if the substrate is sound underneath. Lifting tile, swollen cabinets, and cracked flooring cannot be reliably repaired; the underlying cause (moisture, slab movement) has to be addressed or the repair will fail again. Call (844) 651-3175 and we’ll tell you honestly which side of that line your kitchen is on.
A small kitchen remodel in Denton that keeps its footprint usually runs a few weeks; a full gut remodel with new cabinetry, surface, and layout work runs longer, and the exact timeline is written into your scope before work starts. Ask for the schedule in writing along with the price. Call (844) 651-3175 to schedule a free estimate.
We work from the documented Unilock product catalog and match existing work by modular size, color, and texture rather than settling for a close substitute. For interiors, cabinets, surfaces, and fixtures are sourced from KraftMaid, Wellborn, Cambria, Silestone, Kohler, and Moen product lines with manufacturer specifications on file. We don’t stock parts and we’re an independent contractor, not affiliated with Unilock. Call (844) 651-3175 to talk through what you have and what needs to match.
Bradford Remodeling Co Denton is a member of the Garrison Partners family, established in 2004, and is independently owned and operated under The Garrison Standard. Every project gets a written price before work starts and the 365-Day Done Right Promise on completion. Our technicians have up to 22 years of experience. Background-checked, uniformed technicians arrive on every job, and a live person answers the phone 24/7 at (844) 651-3175. Call today for your free estimate on kitchen remodeling in Denton.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












