A Bradford company - serving Denton, TX
An open living room and dining area after a whole-home remodel
Unilock · Denton

Unilock Windows & Doors in Denton, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Denton
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Windows & Doors: The Denton Owner’s Guide

We install and service Unilock-compatible windows and doors for Denton homeowners, and most single-unit replacements land between $4,500 and $15,000 installed depending on unit count, glass package and frame material. Impact-rated units in Denton run $8,000 to $25,000. Installation is scheduled, not same-day, and every job starts with a written price before any tool comes out.

Contractor using a level to install a new residential door frame in Denton, TX

Call (844) 651-3175

Owners usually find the failure before they see it. A window that won’t latch in August. A door that drags on the threshold after a wet spring. Haze between the panes that wasn’t there last year. Denton sits in a climate that swings from 100-degree summers to hard freezes, and every Unilock unit north of Loop 288 gets worked by that cycle. By the time a homeowner calls us, the symptom is usually a year old and the part has been failing the whole time.

Key Takeaways

  • Unilock windows and doors are catalogued by series, not by the label on the glass – the model number is on the frame, not the sash.
  • Most failures in Denton trace to seal, hardware or frame movement, not glass breakage.
  • Installed single-window replacement: $4,500 to $15,000. Impact-rated: $8,000 to $25,000.
  • Sealed-unit replacement can sometimes be done without pulling the whole window – but only if the frame is sound.
  • Every installation we complete carries the 365-Day Done Right Promise in writing.

Which Unilock Models This Applies To

An open living space after a whole-home remodel

Unilock builds window and door lines across several series, and the part that fits one series will not fit another. The identifying information is stamped on the frame, usually on the head jamb or the side jamb behind the sash – not on the glass, and not on the manufacturer label on the sill. Open the sash or the door panel and look up and to the side. You’re hunting for a series code and a date-of-manufacture stamp. That pair is what lets us match the right replacement part the first time.

Here’s the compatibility gotcha that costs Denton homeowners the most: Unilock has revised its sash and hardware profile over the years, and a replacement sash ordered against the wrong revision won’t seat in the frame even though it looks identical on the spec sheet. We’ve seen this on doors where the hinge prep spacing changed by an eighth of an inch between revisions – the new panel hangs, but it never closes flush. Measure your existing sash height, width and hinge prep before you order anything. Photograph the stamp. That photograph is worth more than any model number you remember.

The OEM-versus-aftermarket decision for Unilock is straightforward. OEM parts are the surest fit and carry the manufacturer’s own warranty, but lead times run longer and the price reflects it. Quality aftermarket equivalents – the ones from established hardware makers with published specs – are often half the cost and function identically when the series match is correct. Where we won’t compromise is the sealed glass unit. On a Unilock window, the sealed unit is where the energy performance lives, and a bargain unit will fog inside two summers in this climate. We source sealed units from makers with documented specs, and we tell you which one we’re using and why.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Windows & Doors Is Failing

These are the five symptoms we see most in Denton, and what’s actually causing each one.

  • Fogging or condensation between the panes. The seal on the sealed glass unit has failed, letting moisture in. This is the most common Unilock window failure we see in Denton, and it’s a glass-unit problem, not a frame problem.
  • The window won’t latch, or latches loosely. The lock hardware has worn, or the sash has shifted out of square. On older Unilock units, worn lock cams are the usual culprit; on newer ones, it’s frame movement from settling.
  • The door drags on the threshold or sticks at the top corner. Either the hinges have sagged or the frame has moved. In Denton’s clay-heavy soil, frame movement shows up two to three years after a dry summer, not immediately.
  • Drafts or visible daylight at the frame. Weatherstripping has compressed and failed. It’s a cheap part, but it’s also the first sign the unit is losing its seal against the rough opening.
  • Water staining on the interior sill or wall below the window. This is the one to take seriously. It usually means the exterior seal or flashing has failed, and water is getting behind the frame rather than just past it.

One honest note on the last item: staining on the sill almost always means the problem started outside. We check the flashing and the exterior seal first, because replacing the window won’t stop water that’s coming in around the rough opening.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Our installed prices for Unilock-compatible window and door work in Denton:

Service Installed Price Range
Single window replacement $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000

What drives the range: how many units you’re replacing, the glass package (standard versus impact-rated versus low-E), frame material, whether the existing rough opening is sound, and whether we’re doing a full-frame replacement or a pocket replacement that reuses the frame. Pocket replacements cost less but only work when the frame is solid – and on a 15-year-old Unilock unit in Denton, the frame is often the part that’s failing.

Every quote is a written line-item price before any work starts. No number that moves at the door. Parts and labor are separated so you can see what the part costs and what the install costs. Every installation we complete is covered by the 365-Day Done Right Promise – if the work doesn’t hold within a full year, we come back and correct it at no charge. The 365-Day Done Right Promise is a written guarantee, signed and in your hand at close, not a verbal promise.

DIY or Call Us?

Some of this is safe for a homeowner to check. Pop the sash and photograph the frame stamp. Test the lock by closing the window and seeing whether the cam engages fully. Run a hand along the weatherstripping to feel for gaps. Wipe condensation and see whether it returns from inside the glass or just from the room. All of that is safe and it gives us what we need to quote accurately.

What we don’t recommend: pulling a window or door out of the rough opening yourself. A window unit weighs between 40 and 120 pounds depending on size, and a door panel is heavier than it looks. Getting one out of a second-story opening without a second set of hands and the right setting blocks is how people get hurt. Beyond the injury risk, pulling a unit and reinstalling it without proper flashing is the most common cause of the water staining we described above. A window that leaks because it was reinstalled wrong costs more to fix than the original repair would have. If the frame is moving, the flashing is suspect, or the unit is above the first floor, call us. We’ll give you a written price and tell you honestly whether a repair or a full replacement makes more sense for your Denton home.

FAQs

An open kitchen and dining area after a remodel

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Denton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Denton team

A local vetted partner works across Denton and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 651-3175
Local Service Coverage

Request a Free Estimate in Denton

Tell us what you need - Bradford Remodeling Co Denton responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch