







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Denton Owner’s Guide
If your Wellborn fence system has a cracked rail, a leaning post, or a gate that drags, we install Wellborn-compatible fence components and replacement sections in Denton at typical installed prices of $3,500 – $9,000, with written pricing before any work begins. We’re an independent service provider and not affiliated with Wellborn. Most owners find out a part has failed the hard way: a rail cracks after a storm, a post starts to lean after a run of wet weeks, or a latch stops lining up and the gate swings into the slab. In Denton, that usually happens in late spring or after a hard freeze, not on a calm day in October.

Which Wellborn Models This Applies To

Wellborn’s fence line covers several series built around different rail profiles and post configurations, and the part that fits one won’t fit another. Before we quote anything, we measure the rail span, the post spacing, and the profile depth, then match it to your original hardware and label. The label stamped or riveted to a post or rail cap is your fastest identifier. If the label is painted over or worn off, a tape measure and a profile photo usually get us to the right component.
For Wellborn specifically, the OEM-versus-aftermarket decision matters. Original components will match your existing profile and color exactly, but lead times stretch during peak fence season in Denton, sometimes by several weeks. Aftermarket equivalents that meet the same spec often arrive faster and cost less. We tell you which way the math falls on your project rather than steering you toward the pricier option by default. We also service KraftMaid, Cambria, and Silestone installations, so if you’re coordinating a fence line with other exterior work, we can keep the schedule in one place.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Fence Installation Is Failing
The failure modes on a Wellborn fence in North Texas weather are consistent, and they show up in a predictable order.
- Hairline cracks along the rail ends. The wood or composite is absorbing moisture at the cut and swelling, which splits the grain at the joint. Left alone, the rail fails at that point within a season or two.
- A post that leans after heavy rain. The footing has shifted, usually because the hole was set in Denton’s expansive clay without proper depth or drainage. Sometimes the post itself rotted at the ground line.
- A gate that drags or won’t latch. The hinge has loosened or the gate has sagged as the frame moved. This one compounds fast, because a dragging gate pulls the hardware out further every time it’s used.
- Loose or lifting pickets. The fasteners have backed out or the wood around them has softened. It’s a small repair if caught early, a rail replacement if the picket has already pulled free.
- Discoloration or soft spots at the bottom third. Moisture is wicking up from the soil or splashing off the slab. This is the early sign of rot, and it’s why we check the ground line on every estimate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Wellborn fence installation and replacement in Denton runs $3,500 – $9,000 installed, with the same range applying whether you’re replacing a failed section or a full run. The number moves based on linear feet, height, the specific Wellborn series, whether you’re going OEM or a spec-matched equivalent, gate count, and how much of the existing footing can be reused. Removal and haul-away are included in the quote, not added at the end.
What drives the range most often is footing work. On Denton’s clay, a post that’s failed usually needs a fresh hole at proper depth, not a patch. We itemize that separately so you see exactly what the ground work costs before we start. Every project gets a written price before any work begins, and the finished job carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself to know what you’re dealing with. Wiggle each post at the ground line, look for cracks at the rail ends, and check whether the gate hardware is tight. Take photos of the label and the failure points. That’s about where DIY stops being a good idea on a fence system.
What goes wrong when owners try to finish the job: replacing a single rail without addressing the footing usually means the new rail fails the same way within a season. Getting post depth wrong in Denton’s clay leads to lean within the first wet cycle. And a gate that’s re-hung on a shifted frame never latches right for long. If you want the part matched correctly and installed to hold, call us at (844) 651-3175 and we’ll give you a real number before any tool comes out.
FAQs

How long does a Wellborn fence system last in Denton? A properly installed Wellborn fence in North Texas typically holds 15 to 20 years, though ground-line rot and footing movement from the clay soil are what shorten that window most often. Annual inspection at the base catches most of it early. Call (844) 651-3175 for a free estimate if your fence is past the decade mark.
Can it be repaired instead of replaced? Sometimes, yes. A single cracked rail or a loose picket is often a repair, while a leaning post or a sagging gate usually means footing work. We’ll tell you which category your fence falls into on the estimate, not after the crew shows up. Call (844) 651-3175 to schedule it.
How long does the swap take? A single section or gate replacement is typically a one-day job. A full run depends on footing work and linear feet, usually a few days. You get the timeline in writing with the price before anything starts. Estimates are free at (844) 651-3175.
How do you source the part? We measure the profile and post spacing, confirm the Wellborn series against the label or a photo, and then quote you both OEM and a spec-matched equivalent so you can see the cost and lead-time difference. No parts are carried on a truck; everything is ordered to your project. Call (844) 651-3175 for an exact quote.
Written by the team at Bradford Remodeling Co Denton, serving Denton and nearby areas.












