







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Denton?
Walk-in shower installation in Denton costs $4,500 to $12,000 for most homes, with the typical project landing around $7,200. A straight tub-swap to a low-curb shower with stock tile runs $4,500 to $6,500, while a curbless, frameless-glass build with custom tile and a bench pushes toward the top of the range. Those numbers include tear-out, waterproofing, tile, glass, and fixture labor.
Denton isn’t a cheap market to build in right now. Between the slab-on-grade foundation construction across much of the city and the demand from the two university corridors, labor runs 8 to 15 percent higher than what you’d see forty minutes east. The good news: a walk-in shower installed correctly is one of the few bathroom investments that returns most of its cost at resale, and it’s the single most requested upgrade we’re asked about in Denton.
Key Takeaways
- Most Denton walk-in shower projects run $4,500 to $12,000; the typical job is around $7,200.
- Tile choice moves the price more than anything else you control: $800 to $3,500 in material swing.
- Waterproofing is where cheap bids cut corners, and it’s the reason so many five-year-old showers leak.
- Bradford gives a written price before work starts, and every install carries the 365-Day Done Right Promise.
- Independent local professionals on our roster are background-checked and uniformed.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how the $4,500 to $12,000 range actually breaks down by line item. These are Denton-market figures for a standard 32 to 60 square foot shower. Get a written line-item estimate before you commit, and make sure waterproofing is listed as its own line, not buried in “labor.”
| Line Item | Typical Cost Range | What’s Included |
|---|---|---|
| Demo and haul-away | $350 – $900 | Removing old tub or shower, tile, and drywall; disposal fees |
| Rough-in plumbing | $500 – $2,000 | Moving the drain, relocating the valve, new supply lines |
| Waterproofing system (substrate + membrane) | $600 – $1,800 | Cement board or foam board, liquid or sheet membrane, flood test |
| Tile and setting materials | $800 – $3,500 | Wall and floor tile, thinset, grout, sealant |
| Tile labor | $1,000 – $3,000 | Layout, setting, grouting, caulking |
| Shower pan and drain | $400 – $1,200 | Pre-sloped pan, linear or center drain, curb |
| Glass enclosure | $700 – $2,500 | Frameless or semi-frameless glass, hardware |
| Fixtures and trim | $300 – $1,200 | Showerhead, valve trim, niche, grab bar, bench |
| Permit and inspection | $150 – $450 | City of Denton permit where plumbing is relocated |
Why the Range Is So Wide
The gap between a $4,500 shower and a $12,000 one is almost never the labor. It’s the specification. A $4,500 project uses a ceramic wall tile, a stock 60-inch pan, and a semi-frameless door. A $12,000 project uses large-format porcelain on the walls, a curbless transition with a linear drain, a built-in bench, a niche, and a frameless glass panel custom-cut to the opening. The tile alone can move $2,000. Glass adds another $1,000 to $1,500 when you go frameless.
One thing that doesn’t change: waterproofing. Every shower we touch gets a proper membrane and a flood test before a single tile goes up. That’s not a line you shorten to win a bid. A shower that leaks into the subfloor costs $3,000 to $6,000 in repairs, which is more than the shower would have cost to begin with.
What Affects Walk-In Shower Installation Pricing in Denton
Six factors drive the number up or down in the Denton market. Some are your call; some are just what the house gives you.
- Shower footprint and configuration. A 32×48 alcove replacement is the budget end. A 60-inch-wide curbless walk-in with a bench sits at the top. Going curbless also means reworking the floor framing and setting a recessed pan, which adds $800 to $2,000.
- Tile selection. Ceramic starts around $2 per square foot. Porcelain runs $4 to $9. Natural stone and large-format slabs run $10 to $25 and require an experienced setter. This is the single most controllable line on the bid.
- Plumbing relocation. If the new drain or valve lands where the old one was, you save $500 to $1,500. Moving the drain means breaking up the slab, which in Denton’s expansive clay soil needs to be done carefully to avoid disturbing the base under the shower pan.
- Foundation type. Much of Denton is slab-on-grade. Cutting into the slab for a shower drain is routine but adds a few hundred dollars and a permit. Pier-and-beam homes are less common here but change the plumbing approach entirely.
- Permit requirements. The City of Denton requires a plumbing permit when you relocate a drain or valve. Skipping the permit is the fastest way to void a homeowner’s insurance claim later. Ask for the permit number in writing.
- Glass and accessory choices. Frameless glass adds $500 to $1,200 over framed. A niche adds $150 to $400. A tile bench adds $400 to $900. Grab bars and a fold-down seat add $200 to $600 and are worth every dollar for aging-in-place.
If you’re comparing this against a bigger scope, a full bathroom remodel in Denton runs $9,000 to $28,000, and a tub-to-shower conversion runs $3,500 to $10,000. A walk-in shower install sits between them. If you’re only replacing a failing shower and keeping the footprint, shower replacement starts at $3,000.

How to Save on Walk-In Shower Installation
Five moves that consistently shave $500 to $2,000 off the number without cutting into waterproofing or structural work.
- Keep the plumbing where it is. If you can live with the drain and valve in the same spot, you save $500 to $1,500 in plumbing labor and slab work. Layout your shower around what’s already plumbed.
- Pick porcelain over natural stone. Porcelain at $4 to $9 per square foot looks nearly identical to marble at $15 and wears better in a wet environment. The tile labor difference alone can hit $1,000.
- Skip frameless for semi-frameless glass. You’ll save $500 to $1,200 and get nearly the same visual result. Frameless is worth it if the glass is a focal point; otherwise, skip it.
- Bundle with a vanity or flooring update. Doing the shower and the vanity in one project saves on mobilization and demolition. A vanity installation runs $800 to $3,000 on its own but $600 to $2,400 when bundled.
- Get three written estimates, but read them line by line. The lowest number is often missing the waterproofing system, the flood test, or the permit. Compare scope, not just bottom-line price. Bradford gives you a written price before any work starts, and free estimates are always available.
One more: don’t buy the cheapest tile you can find. Thinner tile with poor dimensional tolerance costs a setter an extra day of labor and produces a shower with lippage you’ll see every morning. The tile line and the labor line are connected.
What a Walk-In Shower Install Actually Includes
Since the price depends on scope, here’s what’s on a Bradford bid and what shouldn’t be left off a competitor’s. A walk-in shower install is a six-part job. If any part is missing from a written estimate, ask why.
- Demo. Old tub or shower, tile, backer, and drywall come out. Haul-away included.
- Rough-in. New drain, valve, and supply lines set to the new layout. Permit pulled if plumbing moves.
- Substrate and waterproofing. Cement or foam board, a bonded waterproof membrane, and a flood test that holds water 24 hours before tile.
- Tile. Floor and wall tile set on a flat, true substrate. Grout sealed. Caulk at plane changes, not grout.
- Fixtures and glass. Showerhead, valve trim, niche, bench, and door installed and tested for leak-free operation.
- Close-out. Clean site, walkthrough with the homeowner, written scope and the 365-Day Done Right Promise in hand.
The flood test is the step most often skipped in a cheap bid, and it’s the step that catches leaks before they cost you $3,000 to $6,000 in subfloor and framing repairs. If a contractor tells you a flood test isn’t necessary, that’s your answer about the rest of the bid.
Why Bradford Prices Walk-In Showers the Way We Do
Bradford Remodeling operates under The Garrison Standard, which means every price is in writing before a tool comes out. The number doesn’t move at the door. If you’re comparing a $5,800 bid to a $7,400 bid and can’t tell the difference in scope, we’ll sit down and walk through both, line by line.
Here’s what backs the price:
- 365-Day Done Right Promise. Every completed install carries a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. That covers waterproofing failures, tile debonding, glass hardware, and fixture leaks traceable to installation.
- Upfront written pricing. You see the number before work starts. No surprise line items after demo.
- Background-checked, uniformed technicians. You know who’s walking through your door before the crew arrives.
- Live-person phone coverage 24/7. Call and a real person answers, not a voicemail queue.
- Documented brand materials. We specify fixtures and surfaces from a documented roster, including Kohler and Moen for shower trim and valves. Traceable specs mean warranty claims don’t get bounced.
Our technicians have up to 22 years of experience, and the crew that sets your tile is the crew that runs the flood test. That matters more than any sales pitch.
Can You Install a Walk-In Shower in an Older Denton Home?
Yes, and older homes near the Denton square and the courthouse district are where we see the most surprises. The two issues that come up most: undersized drains and out-of-square openings. An older 1.5-inch drain has to be brought to a 2-inch code-required line, which adds $400 to $900. Out-of-square wall framing means furring out the substrate, which adds $300 to $700. Both are fixable, and both should appear on the estimate before demo starts, not after.
Homes in the Denton service area also tend to have more plumbing on exterior walls than newer construction, which can mean additional insulation and freeze protection behind the shower wall. That’s a small line item ($150 to $400) but a real one. We factor it in before the bid goes out.
FAQs – Walk-In Shower Installation Cost
How much does a walk-in shower cost in Denton in 2026?
Walk-in shower installation in Denton runs $4,500 to $12,000, with the typical project around $7,200. A basic alcove install with stock tile and semi-frameless glass hits the low end; a curbless custom-tile build with frameless glass and a bench hits the top. Call (844) 651-3175 for a free estimate – we’ll give you a written number before any work starts.
Is it cheaper to install a walk-in shower or remodel the whole bathroom?
Cheaper to install just the shower. Walk-in shower installation costs $4,500 to $12,000, while a full bathroom remodel in Denton runs $9,000 to $28,000. If the vanity, flooring, and tub are in good shape, an install-only scope saves thousands. If the tile, vanity, and floors are all 20 years past due, a full remodel consolidates mobilization costs. Call (844) 651-3175 and we’ll walk through both options with a written price for each.
Can you install a walk-in shower over an existing tub?
Yes, most tub-to-shower conversions run $3,500 to $10,000 and take three to five working days. The tub comes out, the drain and valve are set to the new shower layout, and the waterproofing and tile go in. Because we’re working with the existing rough-in, the conversion usually lands at the lower end of that range. Call (844) 651-3175 for an exact quote on your specific bathroom.
Does a walk-in shower need a permit in Denton?
Yes, when plumbing is relocated. A permit and inspection run $150 to $450 and are required any time the drain or valve moves. Purely cosmetic tile swaps typically don’t require a permit. Skipping the permit when one is required can void a homeowner’s insurance claim and complicate resale. Every Bradford bid is checked against City of Denton requirements before the number goes out. Call (844) 651-3175 for a free estimate.
How long does a walk-in shower installation take?
Three to six working days for most Denton homes. A basic alcove replacement with tile runs three days. A curbless custom build with a bench and frameless glass runs five to six, mostly waiting on the flood test and grout cure. Rushing the waterproofing cure is the most common cause of early shower failure. We build the timeline around the cure, not around the calendar. Call (844) 651-3175 for a written schedule and price before any work starts.
Where Walk-In Showers Fit in a Whole-Home Plan
Many Denton homeowners install a walk-in shower now and plan a whole-home remodel in stages. That’s a smart sequence. It keeps each project’s price fixed and lets you live through one disruption at a time. If the kitchen is next, a kitchen remodel in Denton runs $14,000 to $45,000, and a cabinet installation runs $4,000 to $13,000. Those numbers don’t change based on the shower, but the mobilization savings do. Every project in the same year with the same contractor saves $500 to $1,200 per additional scope.
If you’re also considering a Denton bathroom remodel that includes a backsplash in the adjoining vanity area, it’s worth pricing together. The same tile labor and materials logistics apply. For a bigger scope, the full bathroom remodel guide covers the numbers end to end.
Whatever you choose, call (844) 651-3175 for a free estimate. A live person answers, and you’ll have a written price in hand before any work starts. If you want to compare the numbers against our other Denton services, the Bradford Remodeling home page lists every service line and price range we publish.
One Last Word on Price
If you get a written bid for a walk-in shower in Denton significantly under $4,500, read it twice. Either the waterproofing is missing, the permit isn’t included, or the glass is a thin stock unit that will fail in three years. Those aren’t savings. They’re costs shifted onto you later. The right price is the one written down before demo, line by line, backed by a guarantee that says exactly what happens when something fails.
Written by the team at Bradford Remodeling Co Denton.
Pricing reflects the Denton market as of 2026. Bradford Remodeling Co Denton offers free estimates – call (844) 651-3175.
What Our Customers Say
"Straightforward people who do what they say. The crew did what the contract said and called before changing anything."
- Dianne W."Primary bath redo. Tile is straight, shower pan was flood tested, and the vanity fits perfectly."
- Tricia S."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F.












