







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Denton, TX
Cabinet installation and refacing in Denton typically runs $4,200 to $9,800 for refacing and $9,500 to $28,000 for full new cabinet installation, depending on whether you’re changing the layout, the door style, and the countertop. Refacing keeps your existing cabinet boxes and replaces the doors, drawer fronts, and veneer; installation means new boxes, new hardware, and often a new footprint. We do both, and we put the price in writing before any work begins.
Most Denton homeowners call us after a bad experience: a crew that quoted one number and billed another, or a refacing job where the veneer started peeling off within a year. That’s not how we operate. Bradford Remodeling Co Denton runs on The Garrison Standard, which means a written price before the first tool comes out and a 365-Day Done Right Promise on every completed project. If the doors squeak, the veneer lifts, or the boxes shift inside that year, we come back and correct it at no charge. Our technicians have up to 22 years of experience, and every one of them is background-checked and uniformed. You know who’s walking through your door before they arrive.
For the full picture of how cabinets fit into a broader remo del – including soffit changes, countertops, and the rough-in work behind the walls – read our guide to Kitchen Remodeling in Denton. For the parent service in other nearby markets, start at our Kitchen Remodeling page. Either way, a live person picks up the phone 24 hours a day at (844) 651-3175.
Key Takeaways
- Refacing in Denton runs $4,200 to $9,800; full cabinet installation runs $9,500 to $28,000.
- We put every number in writing before work starts – no repricing at the door.
- Every cabinet project carries the 365-Day Done Right Promise; if it fails inside a year, we fix it free.
- We install KraftMaid and Wellborn cabinetry, with manufacturer specs and warranties that back our own guarantee.
- Background-checked, uniformed technicians on every job, and a live person answers the phone 24/7.

When You Need Cabinet Installation & Refacing
Refacing and full replacement solve different problems. Refacing is the right call when the boxes are solid and square but the doors, fronts, and finish have failed. Installation is the right call when the layout itself is the problem. Here’s what we hear in Denton:
- Doors that no longer close flush. In the older homes around the Denton Square and the neighborhoods near Texas Woman’s University, humidity swings in spring and summer push cabinet doors out of alignment. If you’re re-hanging doors every few months, the hinges or the boxes have moved.
- Veneer or laminate lifting at the edges. Heat and moisture from kitchen activity peel the finish off older fronts. Once the substrate under the veneer is exposed, refacing is why the front fails again within a season unless the substrate is addressed.
- The layout fights you every day. If the dishwasher blocks a drawer, the corner is a dead zone, or the pantry is a reach-in you have to unload to find anything, new boxes correct the geometry. Refacing doesn’t – it keeps the footprint you already have.
- Water damage at the base. A slow leak under the sink or a dishwasher supply line that failed can delaminate the bottom panel and soften the toe-kick. In Denton, where the clay soil shifts with seasonal moisture, an uneven floor can also torque the base cabinet out of square over time.
- You’re planning to sell and the kitchen reads tired. Refacing with a documented door line and new hardware is one of the faster ways to update a kitchen’s appearance without tearing out boxes that are still structurally sound.
- You’re already replacing countertops. If the counters are coming out anyway, it’s the moment to check the boxes underneath. A refacing job on top of a failing base is money spent twice.
Our Cabinet Installation & Refacing Process
Every job follows the same sequence, and every step gets documented. That’s The Garrison Code in practice – the same written scope and guarantee process on every job, regardless of size.
- Walkthrough and measurement. We measure the existing footprint, check the boxes for square and level, and look at the substrate under any peeling veneer. You get a written scope and a written price before anything else happens.
- Material selection. You choose door style, finish, and hardware from a documented roster of name-brand cabinetry – KraftMaid and Wellborn are on it, each with manufacturer specs and warranties we pass along to you. For the surfaces above and around the cabinets, we work with Cambria and Caesarstone, and fixtures from Kohler and Moen. If your kitchen also involves exterior work near the kitchen window or back door, James Hardie siding and Therma-Tru doors are part of the same approved brand set, so specifications stay traceable across the whole project.
- Protection and demo. Floors and adjacent rooms get covered. Old doors and boxes come out in a controlled sequence, and we haul debris the same day. If the layout is changing, this is when the rough-in work – the plumbing and electrical lines inside the wall – gets handled.
- Installation or refacing. For installation, new boxes go in level and plumb, shimmed, and screwed to the wall studs, not just to each other. For refacing, we address the substrate, apply the new veneer, and hang new doors and fronts on new hardware. Drawers get tested and the spacing gets set so every gap is even.
- Close-out and guarantee. We clean the site, walk the job with you against the written scope, and hand you the signed 365-Day Done Right Promise. If anything fails within that year, we return and correct it at no charge.

Cabinet Installation & Refacing Pricing in Denton
Cabinet refacing in Denton runs $4,200 to $9,800, and full cabinet installation runs $9,500 to $28,000. Those ranges hold for a standard-size kitchen; the variables below move the number up or down, and we put the exact figure in writing before work starts.
| Scope | Typical price range | What’s included |
|---|---|---|
| Refacing, standard kitchen (up to 20 linear feet) | $4,200 – $6,800 | New veneer, doors, drawer fronts, hardware; substrate prep |
| Refacing, larger or L-shaped kitchen | $6,800 – $9,800 | Same scope, more frontage, add a new pantry or island front |
| Full replacement, same footprint | $9,500 – $16,000 | New boxes, doors, front, hardware; counters reused or replaced |
| Full replacement with layout change | $16,000 – $28,000 | New boxes, rough-in adjustments, counters, finishes |
| Hardware and finish upgrade (add-on) | $350 – $900 | New pulls, soft-close hinges, finish touch-up |
What affects the price
- Box condition. If the existing boxes are square, refacing is on the table. If the base panels are water-damaged or the boxes are out of square, refacing won’t hold, and installation is the honest answer.
- Door style and material. Painted MDF and solid wood cost different amounts, and a flat-slab door prices differently than a raised-panel or shaker door. We’ll tell you which lines fit your budget without steering you toward the priciest option.
- Layout changes. Moving a sink, a range, or a dishwasher means rough-in work behind the wall, and that’s a real line item, not a surprise invoice at the end.
- Countertops. If you’re replacing surfaces at the same time, putting quartz on top of new boxes with a new layout costs less than doing them as two separate projects.
We give every price in writing before any work starts, and the number doesn’t move at the door. Call (844) 651-3175 for a free estimate – a live person answers, day or night.
FAQs – Cabinet Installation & Refacing
Can you reface cabinets that are already peeling or water-damaged?
Sometimes, but not always. If the veneer is lifting over a solid substrate, we can prep and reface it. If the base panel or toe-kick has soft spots from water damage, refacing covers the problem instead of fixing it, and new boxes are the right answer. We check the substrate during the walkthrough and tell you which one applies before you commit to anything. Call (844) 651-3175 and we’ll come look – the estimate is free.
How long does cabinet installation take?
Refacing a standard kitchen takes 2 to 3 days. Full replacement with a layout change takes 2 to 4 weeks, most of that time in the rough-in work and waiting on countertops to be measured, cut, and installed. You’ll get a written timeline with your written price, and we’ll tell you up front which days the kitchen will be out of service.
Is it cheaper to reface or replace my cabinets in Denton?
Refacing is cheaper: $4,200 to $9,800 compared to $9,500 to $28,000 for full replacement. The trade-off is that refacing only works if the boxes are structurally sound and you don’t need a layout change. If you’re moving the sink or the range, refacing can’t do that. We’ll tell you which one you actually need rather than selling you the larger job.
Are you available for cabinet projects in Denton the same week?
We can usually get a technician out for a measurement and written estimate within a few business days, and we’ll give you a firm start date at that visit. Every project is covered by the 365-Day Done Right Promise – if something fails inside the year, we fix it at no charge. For scheduling or a free estimate, call (844) 651-3175; a live person answers 24 hours a day, and that’s how you’ll reach us at any hour.
Cabinet work in Denton moves fast enough that a clear scope and a written price are what keep it from turning into a surprise. If the doors are peeling, the layout is fighting you, or you’re replacing counters and want the boxes checked underneath, call Bradford Remodeling Co Denton at (844) 651-3175 for a free estimate. You’ll get a written number, a written scope, and a 365-Day Done Right Promise signed at close – backed by The Garrison Standard, work held to the same discipline as every job we run. Visit our home page to see the full range of what we do.
Written by the team at Bradford Remodeling Co Denton, serving Denton.


